Hello, i have exact the same machine here. I also modded the Socket and the CPU. Mine is running at 1.6V 😀

Neuromancer wrote:

Hello, i have exact the same machine here. I also modded the Socket and the CPU. Mine is running at 1.6V 😀

I didn't modify motherboard, only CPU. What RAM You have? How much did You overclock your sytem? Why you running CPU on 1.6V, mine is running on FSB 133 on 1.45V.

Same combo here, quite nice. Don't you just hate that "Tualeron" CPU ID string, though?

firage wrote:

Same combo here, quite nice. Don't you just hate that "Tualeron" CPU ID string, though?

Yes, I do, maybe i will edit the bios and write the proper name of processor.

Seems that your Geforce 5900XT@5950ultra has no problems with the oc'ed 93.46MHz AGP speed 🤣

Is that cooler on the Geforce from Zalman? The fan isn't original right?! How noisy it is (the rpm with this little blades)?

melbar wrote:

Seems that your Geforce 5900XT@5950ultra has no problems with the oc'ed 93.46MHz AGP speed 🤣

Is that cooler on the Geforce from Zalman? The fan isn't original right?! How noisy it is (the rpm with this little blades)?

Geforce Gainward FX 5900XT@5950 Ultra works ok on FSB 140 na CUBX, FSB 150 works in 3Dmark 2001 SE but with artifacts and hangs. I don't know the cooler name, i bought the card used.

Yesterday I mounted Infineon 256 MB PC133 CL2, but motherboard Asus CUBX-E 1.01 set the memory on 2-2-2-8. The memory does not work on this settings, I had to manually set memory on 2-2-2-32, and then works well.

When was used one memory slot only system works on FSB 150 with times 3-3-3-32, on FSB 140 with times 2-2-2-32, on FSB 133 with times 2-2-2-32. After I put four memory bones, system works well only on max FSB 124, on FSB 133 hangs even on times 3-3-3-32.

System: Windows XP SP3, forceware 81.85.

Benchmark: Futuremark 3DMark 2001SE default settings - 9274 score (4 x Infineon 256 MB PC133 CL2)

Try an earlier driver if possible. The scores are a bit on the low side.

Imperious wrote:

Try an earlier driver if possible. The scores are a bit on the low side.

I think, it is not so bad, I go on AGP x2 not x8, it is a big deference.

My 3DMark01 Mega Thread

Jade Falcon wrote:

just a quick unoptimized 3d01 run with stock setting and a 100mhz cpu OC. https://s9.postimg.org/65kl32zq5/untitled.jpg […]
Show full quote

just a quick unoptimized 3d01 run with stock setting and a 100mhz cpu OC.

havli wrote:

10k barrier with PIII Coppermine beaten :D […]
Show full quote

10k barrier with PIII Coppermine beaten 😁

PIII 933 @ 1297 MHz
Asus TUSL2
GF 6800 GT @ 425/1100
256MB PC133 CL2 (Infineon)
Win XP SP3

10 008 points

melbar wrote:

Seems that your Geforce 5900XT@5950ultra has no problems with the oc'ed 93.46MHz AGP speed 🤣

Is that cooler on the Geforce from Zalman? The fan isn't original right?! How noisy it is (the rpm with this little blades)?

I must be a Zalman clone. Original has Zalman written on the blades and on the holder.

has anyone used this with a Pentium 3 1000Mhz ? jumperless, it detects it only as a 7.5 x 100 Mhz = 750Mhz cpu. With jumpers set to 7.5 x 133 (agp 2/3), i get to the screen with the gfx bios but not the mainboard POST

tomoa wrote:

I don't know the cooler name, i bought the card used.

A thread necro I know, but it looks very much like a NorthQ NQ-3860, but with a replacement fan

I get around 5600 points with a PIII 933 and a Radeon 9550 on via 133A chipset. I though I was completely CPU limited ?

okenido wrote:

I get around 5600 points with a PIII 933 and a Radeon 9550 on via 133A chipset. I though I was completely CPU limited ?

It's your Radeon probably limiting, my P3 1000 coppermine, 1.5gb ram, 6800 XT 256mb on 133a chipset epox board hits tad under 9500 points..

Those heatsinks look like they should complete the circle.