First post, by twilliamc
- Rank
- Newbie
Good Afternoon Everyone,
I love this forum. I have lurked for months and finally have something to share. After digging through a back room of a friend's business, I was able to acquire this NEC Ready 9716 and a few goodies. It currently runs with a disk drive, but I hope to get my CF and/or SD adapter working (for another thread). Anyway, here are some photos and the specs.
SPECS:
- Pentium MMX @ 200MHz
- 128MB RAM
- Onboard ATI RAGE II PRO
- SoundBlaster AWE64
- Creative CD-ROM
- Mitsumi 3.5" Floppy Disk Drive
- Seagate 4GB Hard Disk Drive
- 200W PSU
- IDE Drive Tray
- DOS 6.22
- Windows 3.1
COMING SOON:
- IDE to CF/SD*
- 5.25" Floppy Disk Drive
* Currently the system hangs during boot if I have the IDE to CF or IDE to SD attached. So many hours troubleshooting Master/Slave, BIOS, and IDE/Floppy devices in use with the CF/IDE. I Will probably seek help in another thread.
Unnamed: 486DX4 @ 120MHz, 16MB, 2GB, 2MB VGA, SBPro 2.0, DOS/W3.11, W95
PC-65:P3 @ 800MHz x2, 512MB, 128GB SSD, Voodoo3, SB Live!, Win98SE