ph4nt0m wrote on 2023-01-22, 03:02:

I see you still haven't got rid of those Sanyo CG capacitors. These are not even low ESR actually.

a capacitor upgrade would be a nice addition to this motherboard. Low priority atm.
Next time I build it, I may do this. It is currently in my motherboard storage.

Sphere478 wrote on 2022-01-21, 20:32:

I wonder if a interposer is possible to upgrade the legged footprint to a bga mount

Yeah it is possible but not easy to solder on board. I made it 2 years ago for LPC546xx MCU by NXP because of chip shortage on global market. I designed a board with TQFP package but then only BGA left available when time come to components ordering. Because I need to continue with FW development I designed a small 4-layer interposer that has BGA footprint on top side and TQFP counter pads on bottom side. I 1st needed to put solder on interposer pads and the board pads, properly align it and reflow with hot air. Then I measured if all TQFP pads are connected properly to BGA pads and use hotair again to solder on the BGA chip. It was a lot of fun 😀 I belive the same would be possible.also for bigger chips...

http://www.ebastlirna.cz/modules/Forums/files … erposer_760.jpg

Very nice! Good job 😀

Radeon 9800 pro with 9700 pro cat 3.1 drivers
K6-3+ 570 (modded from 2+)
Freeway ultra

How can I improve my score?

Sphere478 wrote on 2024-01-21, 17:01:

Radeon 9800 pro with 9700 pro cat 3.1 drivers K6-3+ 570 (modded from 2+) Freeway ultra […]
Show full quote

Radeon 9800 pro with 9700 pro cat 3.1 drivers
K6-3+ 570 (modded from 2+)
Freeway ultra

How can I improve my score?

No idea with that fuzzy picture.

supercordo wrote on 2024-01-21, 17:35:

Sphere478 wrote on 2024-01-21, 17:01:

Radeon 9800 pro with 9700 pro cat 3.1 drivers K6-3+ 570 (modded from 2+) Freeway ultra […]
Show full quote

Radeon 9800 pro with 9700 pro cat 3.1 drivers
K6-3+ 570 (modded from 2+)
Freeway ultra

How can I improve my score?

No idea with that fuzzy picture.

Sorry vogons takes forever to upload images from my phone and often errors out so I try to make them zoomed in as possible to get them to upload easier

I recalled previous experience with these via chipsets how much of a difference single sided and double sided made from a speed and stability perspective.

I did manage to find a set of 256mb x 3 sticks that gave 768mb stable that I was running for a few weeks now. But just decided to try 1 x 128mb single sided and 2 x 128mb single sided as a test.

So far 256mb 2x128 single sided has been the fastest. About to try 384mb

I will sometimes use LitPhoto to resize my photos when uploading and it works very well. It can also do bulk operations on many files at a time, as well as the option to delete the original.

https://play.google.com/store/apps/details?id … coffee.litphoto

Thanks 😀

I’m making progress!

This config is overclocked from previous 112mhz fsb 5.5x core 384mb of ram. 3x single sided pc150 pc150 pc133

I’m trying to recall if I made a cheat sheet for dip settings earlier in thread. Is there a 105 fsb option?

By the way, I have two geforce 3 ti 500s at my disposal but can’t seem to get them to work in 3d on one, seems to be a driver issue. And the other won’t post on this board

Sphere478 wrote on 2024-01-21, 18:58:

By the way, I have two geforce 3 ti 500s at my disposal but can’t seem to get them to work in 3d on one, seems to be a driver issue. And the other won’t post on this board

Do you have the memory interleave driver installed?

https://www.georgebreese.com/net/software/rea … v015_readme.htm

supercordo wrote on 2024-01-21, 22:30:

Sphere478 wrote on 2024-01-21, 18:58:

By the way, I have two geforce 3 ti 500s at my disposal but can’t seem to get them to work in 3d on one, seems to be a driver issue. And the other won’t post on this board

Do you have the memory interleave driver installed?

https://www.georgebreese.com/net/software/rea … v015_readme.htm

No… 🤔🧐 you are using this? How much does it help? I’m gonna try it!

Okay, so I went tot he parent webpage but it won't let me download the zip. can you rehost here?

Sphere478 wrote on 2024-01-22, 00:15:

supercordo wrote on 2024-01-21, 22:30:

Sphere478 wrote on 2024-01-21, 18:58:

By the way, I have two geforce 3 ti 500s at my disposal but can’t seem to get them to work in 3d on one, seems to be a driver issue. And the other won’t post on this board

Do you have the memory interleave driver installed?

https://www.georgebreese.com/net/software/rea … v015_readme.htm

No… 🤔🧐 you are using this? How much does it help? I’m gonna try it!

Okay, so I went tot he parent webpage but it won't let me download the zip. can you rehost here?

Thru Wayback 😀

Sphere478 wrote on 2024-01-21, 18:58:

By the way, I have two geforce 3 ti 500s at my disposal but can’t seem to get them to work in 3d on one, seems to be a driver issue. And the other won’t post on this board

Try older driver version, maybe that you tried use 686 instructions (CMOV...)

I'm surprised that this motherboard doesn't have the option to enable memory interleave in the CMOS settings. I can confirm that the Breese patch works - I tested it with Windows 98 on my Epox board, which does have the option to enable it in the CMOS settings. With it disabled in CMOS, using the patch gave me the same small boost in memory bandwidth as having it enabled did without the patch.

RayeR wrote on 2024-01-22, 02:16:

Sphere478 wrote on 2024-01-21, 18:58:

By the way, I have two geforce 3 ti 500s at my disposal but can’t seem to get them to work in 3d on one, seems to be a driver issue. And the other won’t post on this board

Try older driver version, maybe that you tried use 686 instructions (CMOV...)

7.76

Repo Man11 wrote on 2024-01-22, 02:29:

I'm surprised that this motherboard doesn't have the option to enable memory interleave in the CMOS settings. I can confirm that the Breese patch works - I tested it with Windows 98 on my Epox board, which does have the option to enable it in the CMOS settings. With it disabled in CMOS, using the patch gave me the same small boost in memory bandwidth as having it enabled did without the patch.

Can someone modbin or something this freeway ultra bios to add the option?

Sphere478 wrote on 2024-01-22, 04:22:

7.76

OK, this is really old ver. I wonder it already supports GF3. I used such low versions with TNT2 these days...
Maybe you can try something a bit newer 1x.xx-3x.xx.
How exactly it doesn't work? Also have you installed latest AGP drivers for chipset? I remember that those crappy chipsets + AGP was a pain in the....

Can someone modbin or something this freeway ultra bios to add the option?

Maybe. I used Modbin to see if I could enable bank interleave on my Soyo 5EMA+, but it wasn't hidden, it wasn't there at all (and BIOS modding beyond that is above my pay grade). So I used the Breese patch on that board.

RayeR wrote on 2024-01-23, 17:10:

OK, this is really old ver. I wonder it already supports GF3. I used such low versions with TNT2 these days... Maybe you can try […]
Show full quote

Sphere478 wrote on 2024-01-22, 04:22:

7.76

OK, this is really old ver. I wonder it already supports GF3. I used such low versions with TNT2 these days...
Maybe you can try something a bit newer 1x.xx-3x.xx.
How exactly it doesn't work? Also have you installed latest AGP drivers for chipset? I remember that those crappy chipsets + AGP was a pain in the....

That driver is the one that gets the best frame rates, trying to get it to work