VOGONS

Common searches


First post, by Guest

User metadata

I have TFT monitor, whose default resolution is 1280 x 1024 pixels. Using other resolutions, the image is bad.

If the original resolution of DOS game is f.ex 320 x 200 pixels, is it possible to run it in 3x (960 x 600 pixels) or 4x (1280 x 800 pixels) window holding full screen resolution still at 1280 x 1024.

In the config file there's no possible to give parameter scalervalue normal3xor normal4x.

Reply 2 of 7, by red_avatar

User metadata
Rank Oldbie
Rank
Oldbie

A problem with this: it "softens" the edges of the graphics, something I'd rather not have. Is there a way to just increase the size of the window without having fuzzy edges?

http://www.stevieparmentier.com/edges.jpg

This is from Leisure Suit Larry 3 and as you can see, it's quite obvious. I prefer the real pixel look.

scaler=normal2x is a good straight pixel-resize but it only doubles, while I'd like to have it 3x or 4x for my LCD screen. 2x is just too small.