…Show last 284 lines
61frameskip=0
62aspect=false
63scaler=none
64
65[cpu]
66# core: CPU Core used in emulation. auto will switch to dynamic if available and appropriate.
67# Possible values: auto, dynamic, normal, full, simple.
68# cputype: CPU Type used in emulation. auto is the fastest choice.
69# Possible values: auto, 386, 386_slow, 486_slow, pentium_slow, 386_prefetch.
70# cycles: Amount of instructions DOSBox tries to emulate each millisecond.
71# Setting this value too high results in sound dropouts and lags.
72# Cycles can be set in 3 ways:
73# 'auto' tries to guess what a game needs.
74# It usually works, but can fail for certain games.
75# 'fixed #number' will set a fixed amount of cycles. This is what you usually need if 'auto' fails.
76# (Example: fixed 4000).
77# 'max' will allocate as much cycles as your computer is able to handle.
78#
79# Possible values: auto, fixed, max.
80# cycleup: Amount of cycles to decrease/increase with keycombo.(CTRL-F11/CTRL-F12)
81# cycledown: Setting it lower than 100 will be a percentage.
82
83core=auto
84cputype=auto
85cycles=auto
86cycleup=500
87cycledown=20
88
89[mixer]
90# nosound: Enable silent mode, sound is still emulated though.
91# rate: Mixer sample rate, setting any device's rate higher than this will probably lower their sound quality.
92# Possible values: 44100, 48000, 32000, 22050, 16000, 11025, 8000, 49716.
93# blocksize: Mixer block size, larger blocks might help sound stuttering but sound will also be more lagged.
94# Possible values: 1024, 2048, 4096, 8192, 512, 256.
95# prebuffer: How many milliseconds of data to keep on top of the blocksize.
96
97nosound=false
98rate=44100
99blocksize=1024
100prebuffer=20
101
102[midi]
103# mpu401: Type of MPU-401 to emulate.
104# Possible values: intelligent, uart, none.
105# mididevice: Device that will receive the MIDI data from MPU-401.
106# Possible values: default, win32, alsa, oss, coreaudio, coremidi, mt32, none.
107# midiconfig: Special configuration options for the device driver. This is usually the id of the device you want to use.
108# See the README/Manual for more details.
109
110mpu401=intelligent
111mididevice=win32
112midiconfig=0
113
114[sblaster]
115# sbtype: Type of Soundblaster to emulate. gb is Gameblaster.
116# Possible values: sb1, sb2, sbpro1, sbpro2, sb16, gb, none.
117# sbbase: The IO address of the soundblaster.
118# Possible values: 220, 240, 260, 280, 2a0, 2c0, 2e0, 300.
119# irq: The IRQ number of the soundblaster.
120# Possible values: 7, 5, 3, 9, 10, 11, 12.
121# dma: The DMA number of the soundblaster.
122# Possible values: 1, 5, 0, 3, 6, 7.
123# hdma: The High DMA number of the soundblaster.
124# Possible values: 1, 5, 0, 3, 6, 7.
125# sbmixer: Allow the soundblaster mixer to modify the DOSBox mixer.
126# oplmode: Type of OPL emulation. On 'auto' the mode is determined by sblaster type. All OPL modes are Adlib-compatible, except for 'cms'.
127# Possible values: auto, cms, opl2, dualopl2, opl3, none, hardware.
128# oplemu: Provider for the OPL emulation. compat might provide better quality (see oplrate as well).
129# Possible values: default, compat, fast.
130# oplrate: Sample rate of OPL music emulation. Use 49716 for highest quality (set the mixer rate accordingly).
131# Possible values: 44100, 49716, 48000, 32000, 22050, 16000, 11025, 8000.
132# hardwarebase: base address of the real hardware soundblaster:
133# 210,220,230,240,250,260,280
134
135sbtype=sb16
136sbbase=220
137irq=7
138dma=1
139hdma=5
140sbmixer=true
141oplmode=auto
142oplemu=default
143oplrate=44100
144hardwarebase=220
145
146[gus]
147# gus: Enable the Gravis Ultrasound emulation.
148# gusrate: Sample rate of Ultrasound emulation.
149# Possible values: 44100, 48000, 32000, 22050, 16000, 11025, 8000, 49716.
150# gusbase: The IO base address of the Gravis Ultrasound.
151# Possible values: 240, 220, 260, 280, 2a0, 2c0, 2e0, 300.
152# gusirq: The IRQ number of the Gravis Ultrasound.
153# Possible values: 5, 3, 7, 9, 10, 11, 12.
154# gusdma: The DMA channel of the Gravis Ultrasound.
155# Possible values: 3, 0, 1, 5, 6, 7.
156# ultradir: Path to Ultrasound directory. In this directory
157# there should be a MIDI directory that contains
158# the patch files for GUS playback. Patch sets used
159# with Timidity should work fine.
160
161gus=true
162gusrate=22500
163gusbase=240
164gusirq=5
165gusdma=3
166ultradir=C:\ULTRASND
167
168[speaker]
169# pcspeaker: Enable PC-Speaker emulation.
170# pcrate: Sample rate of the PC-Speaker sound generation.
171# Possible values: 44100, 48000, 32000, 22050, 16000, 11025, 8000, 49716.
172# tandy: Enable Tandy Sound System emulation. For 'auto', emulation is present only if machine is set to 'tandy'.
173# Possible values: auto, on, off.
174# tandyrate: Sample rate of the Tandy 3-Voice generation.
175# Possible values: 44100, 48000, 32000, 22050, 16000, 11025, 8000, 49716.
176# disney: Enable Disney Sound Source emulation. (Covox Voice Master and Speech Thing compatible).
177
178pcspeaker=true
179pcrate=44100
180tandy=auto
181tandyrate=44100
182disney=false
183
184[joystick]
185# joysticktype: Type of joystick to emulate: auto (default), none,
186# 2axis (supports two joysticks),
187# 4axis (supports one joystick, first joystick used),
188# 4axis_2 (supports one joystick, second joystick used),
189# fcs (Thrustmaster), ch (CH Flightstick).
190# none disables joystick emulation.
191# auto chooses emulation depending on real joystick(s).
192# (Remember to reset dosbox's mapperfile if you saved it earlier)
193# Possible values: auto, 2axis, 4axis, 4axis_2, fcs, ch, none.
194# timed: enable timed intervals for axis. Experiment with this option, if your joystick drifts (away).
195# autofire: continuously fires as long as you keep the button pressed.
196# swap34: swap the 3rd and the 4th axis. can be useful for certain joysticks.
197# buttonwrap: enable button wrapping at the number of emulated buttons.
198
199joysticktype=auto
200timed=true
201autofire=false
202swap34=false
203buttonwrap=false
204
205[serial]
206# serial1: set type of device connected to com port.
207# Can be disabled, dummy, modem, nullmodem, directserial.
208# Additional parameters must be in the same line in the form of
209# parameter:value. Parameter for all types is irq (optional).
210# for directserial: realport (required), rxdelay (optional).
211# (realport:COM1 realport:ttyS0).
212# for modem: listenport (optional).
213# for nullmodem: server, rxdelay, txdelay, telnet, usedtr,
214# transparent, port, inhsocket (all optional).
215# Example: serial1=modem listenport:5000
216# Possible values: dummy, disabled, modem, nullmodem, directserial.
217# serial2: see serial1
218# Possible values: dummy, disabled, modem, nullmodem, directserial.
219# serial3: see serial1
220# Possible values: dummy, disabled, modem, nullmodem, directserial.
221# serial4: see serial1
222# Possible values: dummy, disabled, modem, nullmodem, directserial.
223
224serial1=dummy
225serial2=dummy
226serial3=disabled
227serial4=disabled
228
229[printer]
230# printer: Enable printer emulation.
231# dpi: Resolution of printer (default 360).
232# width: Width of paper in 1/10 inch (default 85 = 8.5'').
233# height: Height of paper in 1/10 inch (default 110 = 11.0'').
234# printoutput: Output method for finished pages:
235# png : Creates PNG images (default)
236# ps : Creates Postscript
237# bmp : Creates BMP images (very huge files, not recommend)
238# printer : Send to an actual printer (Print dialog will appear)
239# multipage: Adds all pages to one Postscript file or printer job until CTRL-F2 is pressed.
240# docpath: The path where the output files are stored.
241# timeout: (in milliseconds) if nonzero: the time the page will
242# be ejected automatically after when no more data
243# arrives at the printer.
244
245printer=false
246dpi=360
247width=85
248height=110
249printoutput=png
250multipage=false
251docpath=.
252timeout=0
253
254[parallel]
255# parallel1: parallel1-3 -- set type of device connected to lpt port.
256# Can be:
257# reallpt (direct parallel port passthrough using Porttalk),
258# printer (virtual dot-matrix printer, see [printer] section)
259# Additional parameters must be in the same line in the form of
260# parameter:value.
261# for reallpt:
262# Windows: realbase (the base address of your real parallel port).
263# Standard ports are 378, 278 and 3BC. The first two can be ECP ports.
264# PCI add-on cards may use nonstandard ports, look them up in the device manager.
265# Default: 378
266# You have to install the PortTalk driver from
267# http://www.beyondlogic.org/porttalk/porttalk.htm first.
268# Linux: realport (the parallel port device i.e. /dev/parport0).
269# for printer:
270# printer still has it's own configuration section above.
271# parallel2: see parallel1
272# parallel3: see parallel1
273
274parallel1=disabled
275parallel2=disabled
276parallel3=disabled
277
278[glide]
279# glide: Enable glide emulation: true,false.
280# grport: I/O port to use for host communication.
281# lfb: LFB access: full,read,write,none.
282# splash: Enable 3dfx splash logo: true,false. Need 3DfxSpl2.dll
283
284[pci]
285# voodoo: Enable VOODOO support.
286# Possible values: false, software, opengl, auto.
287 # voodoomem: Specify VOODOO card memory size.
288 # 'standard' 4MB card (2MB front buffer + 1x2MB texture unit)
289 # 'max' 12MB card (4MB front buffer + 2x4MB texture units)
290 # Possible values: standard, max.
291
292voodoo=auto
293voodoomem=standard
294
295glide=true
296grport=600
297lfb=full
298splash=true
299
300[dos]
301# xms: Enable XMS support.
302# ems: Enable EMS support.
303# umb: Enable UMB support.
304# keyboardlayout: Language code of the keyboard layout (or none).
305
306xms=true
307ems=false
308umb=true
309keyboardlayout=none
310
311[ipx]
312# ipx: Enable ipx over UDP/IP emulation.
313
314ipx=false
315
316[ne2000]
317# ne2000: Enable Ethernet passthrough. Requires [Win]Pcap.
318# nicbase: The base address of the NE2000 board.
319# nicirq: The interrupt it uses. Note serial2 uses IRQ3 as default.
320# macaddr: The physical address the emulator will use on your network.
321# If you have multiple DOSBoxes running on your network,
322# this has to be changed for each. AC:DE:48 is an address range reserved for
323# private use, so modify the last three number blocks.
324# I.e. AC:DE:48:88:99:AB.
325# realnic: Specifies which of your network interfaces is used.
326# Write 'list' here to see the list of devices in the
327# Status Window. Then make your choice and put either the
328# interface number (2 or something) or a part of your adapters
329# name, e.g. VIA here.
330
331ne2000=true
332nicbase=300
333nicirq=3
334macaddr=AC:DE:48:88:99:AA
335realnic=list
336
337[autoexec]
338# Lines in this section will be run at startup.
339# You can put your MOUNT lines here.
340#mixer master 50:50
341#mixer sb 20:20
342mount C "D:\Gry\Symulatory\Lotnicze\Microsoft Flight Simulator 5\"
343c:
344fs5.exe x