You're supposed to choose which one of the 4 tables you wanna play, IIRC. There are 4 pinball tables in the game anyway.

No, I get the menu with the different tables, and I choose one of them. Then appears the "Loading" screen, but instead of showing the table, there are kind of four small tables top and bottom the screen.

It's like the game screen repeated in a small size, in fact, if I press ESC, I can see a very little text below every "table" saying "Want to quit?".

Sorry, I had not posted my system specs:

MSI 845E
P4 2400
256Mb DDR
Nvidia Mx 420 64Mb
Integrated AC97 audio
WXP Home SP1
DOSBox 0.63

Also forgot to say that the sound goes right, and I set the game resolution at 640x480 SVGA.

Thanks!

mago wrote:

Sorry, I had not posted my system specs:
Also forgot to say that the sound goes right, and I set the game resolution at 640x480 SVGA.

What if you set it to a smaller resolution such as 320x200 or 320x240?

I have exactly the same problem. All intro screens work fine, however after selecting a table and loading it u see 4 tables instead of 1 as it should

Selecting the lowest resolution helped here

good.
I read in the gamehost thingie of underdogs that it worked in 0.61
so maybe that version support higher modes better.

I've tried setting resolution at the highest of the two VGA options and it works fine. Then just ALT + ENTER, readjust the screen and I can play it full screen.

Thanks!

Just tried, 640 mode doesn't work in 0.61 either.
For 360x350 mode, it seem it was coded on a specific video card
which doesn't set to double width mode as is the case when you run it in dosbox (or any other real card I tried) As a result, the ball is streched in dosbox.
(similar problem in pinball fantasies)
With a hack to set this mode to single width it's looking good.