Inflated capacitators on a supply board \ VOGONS

Inflated capacitators on a supply board

Topic actions

Post a reply

First post, by SavageKurtain

Posted on 2024-01-07, 10:03

SavageKurtain Offline

Rank Newbie

Rank: Newbie
Posts: 61
Joined: 2023-01-28, 14:30

Don't know if it's called supply board. The problem is that some capacitators of the board are inflated and they need to be changed, but... What if i'm also searching for a replacement board, in case that's not possible?
Anyway, the board itself supplies this motherboard (a VIA EPIA), which can be found on this old thread i made sometime ago: VIA VT-8321 sound on Windows 98
I want to know what kind of model is this little supply board, so here's some photos:

Reply 1 of 2, by konc

Posted on 2024-01-07, 10:25

konc Offline

Rank l33t

Rank: l33t
Posts: 2277
Joined: 2013-01-14, 15:09
Location: Greece

I don't know the model of the board, but replacing these capacitors should be a fairly easy job for someone who can solder.
Also because it's just s small board many electronics/repair shops will undertake the job, if you (or a friend) can't do it.

Reply 2 of 2, by giantclam

Posted on 2024-01-07, 10:55

giantclam Offline

Rank Member

Rank: Member
Posts: 413
Joined: 2023-08-25, 23:49

Morex DC-DC power supply (12VDC to ATX) ...'D2D' suggests it's a 27xx model (depends on the case model it was fitted to)... http://www.morex-case.ru/download/morex_2014.pdf

Capacitors are off-the-shelf, easy fix.

Go to top of page Go to top of page

Back to General Old Hardware

Main menu

Common searches