First post, by majestyk
- Rank
- Oldbie
I hope, some people here own this mainboard and can help me identify mainly the resistor values that are missing on the single CPU version.
First there are some components missing near the VRM socket:
R34, R35, R37, R42, R44, R49, CB171, CB172 and R61 are not populated. I haven´t found good pictures of this area so far, so I don´t know if all these components are present on the dual CPU version and I also need to know the resistor values.
Next are the components inside the 2nd CPU socket:
I need to know the values of the missing R257, CB49, R8, CB15, CB16, CB70, R27, R28, C101, R253, R254, CB167, CB170, CB168, CB169, C103, CB67, CB68, CB69 and the row CB52-CB5x-CB56-CB58-CB59-CB60-CB64.
Finally(?) there are the components around the APIC chip:
R247 -> 0R
R267, R249, R250 plus R193, R205 at the clock generator are missing. (I assume the APIC chip gets it´s own clock signal.)
The V-I/O transistor and heatsink, the jumper headers, the 10µF radial- and SMD-tantalums, the ZIF- socket and VRM-socket are obvious 😀
But any help ID-ing these components, especially the resistors is highly appreciated, otherwise this project cannot be materialized!