FIC PT-2007 mouse not working \ VOGONS

FIC PT-2007 mouse not working

Topic actions

First post, by Jackhead

Posted on 2020-08-02, 09:17

Jackhead Offline

Rank Oldbie

Rank: Oldbie
Posts: 554
Joined: 2020-04-15, 12:10
Location: Germany

Hi,

i have some problems getting my mouse working.
OS: Dos 6.22 / win 3.11
I tryed different mouse dos driver. They load fine. But i have no mouse in any application.
I tryed connecting my PS2 mouse to the MS_mouse connector of the board. I also tryed different mouse types, also with com adapter on Com1. Any time the same, driver load fine but no mouse function.
In the bios PS/2 mouse support is enabled.
Is there any special on the FIC PT2007 mainboard i missed? Connector and mouse work fine on another mainboard.
Maybe there is a conflict but dont what to test more..
Anyone an idea ?

regards
Chris

Win98SE: Asus XG DLS - 1x P3 Xeon SL4XY 900/100/2- SG Voodoo 5 6000 PCI - 1GB RAM ECC- Diamond Monster Sound MX300 - Roland MPU-401AT (Yucatan FX)

Reply 1 of 4, by Deksor

Posted on 2020-08-02, 10:02

Deksor Offline

Rank l33t

Rank: l33t
Posts: 3423
Joined: 2016-06-07, 14:37

Is the PS2 connector on a bracket or directly on the motherboard ?
Make sure the pinout of the serial port header is matching the pinout of your mobo's connector. There are two types of serial connectors

Trying to identify old hardware ? Visit The retro web - Project's thread The Retro Web project - a stason.org/TH99 alternative

Reply 2 of 4, by Jackhead

Posted on 2020-08-02, 10:40

Jackhead Offline

Rank Oldbie

Rank: Oldbie
Posts: 554
Joined: 2020-04-15, 12:10
Location: Germany

Yes that was the trick. I checked the pinout and it was different.
Here the pinout for FIC motherboards:

PIN#1-Mouse Data
PIN#2-N.C. (Not Connected)
PIN#3-Ground
PIN#4-Vcc
PIN#5-Mouse Clock

Maybe this helps someone else in the future.

regards
Chris

Win98SE: Asus XG DLS - 1x P3 Xeon SL4XY 900/100/2- SG Voodoo 5 6000 PCI - 1GB RAM ECC- Diamond Monster Sound MX300 - Roland MPU-401AT (Yucatan FX)

Reply 3 of 4, by Deksor

Posted on 2020-08-02, 16:22

Deksor Offline

Rank l33t

Rank: l33t
Posts: 3423
Joined: 2016-06-07, 14:37

Glad I could help 😀

Trying to identify old hardware ? Visit The retro web - Project's thread The Retro Web project - a stason.org/TH99 alternative

Reply 4 of 4, by bbusse

Posted on 2024-03-27, 13:35

bbusse Offline

Rank Newbie

Rank: Newbie
Posts: 3
Joined: 2021-05-03, 23:42

Jackhead wrote on 2020-08-02, 10:40:
Yes that was the trick. I checked the pinout and it was different. Here the pinout for FIC motherboards: […]
Show full quote

Yes that was the trick. I checked the pinout and it was different.
Here the pinout for FIC motherboards:

PIN#1-Mouse Data
PIN#2-N.C. (Not Connected)
PIN#3-Ground
PIN#4-Vcc
PIN#5-Mouse Clock

Maybe this helps someone else in the future.

regards
Chris

Sorry to necro-post... but I just wanted to say thanks for this. I have an FIC 486-PVT-IO board with a 5-pin header for PS/2 Mouse and I was struggling to get it to work. I bought two different PS/2 ports on brackets with combo Parallel port, and neither of them had the correct pinout. The manual for this board partially exists, but nothing regarding the pinout on the board. I was able to use the info you provided, a multimeter on the PS/2 port/bracket, and figure out which pins were for what. Moved the wires/pins around in the 5-pin connector and voila! I finally have a PS/2 mouse working.

Go to top of page Go to top of page

Back to General Old Hardware