Yeah i just need time to do it. I'm gonna try to do it this week still. First things first, if any one of you guys wants to give me the correct pins for clock and PS/2 data in the controller i'll be happy, as i can't figure what are the correct pins by reading the datasheet myself.
OK so let's think staright about this:
PS/2 pinout:
1- Data. (Here this is supposed to be bi-directional, mouse to controller and controller to mouse)
2- Not connected
3- Ground
4- 5V line
5- Clock (I think here is one direction only, so it's mouse to controller only)
6- Not connected
Relevant pins on the HOLTEK controller:
23- Mouse data output pin for PS/2 motherboard. (Direction is Input/Output)
24- Mouse clock output pin for PS/2 motherboard. (Direction is Input/Output)
28- Mouse data input pin for PS/2 motherboard. (Direction is Input/Output)
36- Mouse output buffer full interrupt for PS/2 motherboard (active high) (Direction is Output only)
39- Mouse clock input pin for PS/2 motherboard. (Direction is Input only)
But this is for PS/2 motherboards, for AT the datasheet just talks about general purpose input/ouput pins.
I need serious help.
Datasheet:
http://html.alldatasheet.com/html-pdf/64463/H … /3/HT6542B.html
EDIT: BTW, BIOS is AMI.