Reply 60 of 62, by PowerPie5000
- Rank
- Oldbie
wrote:Info on the net suggests that the major cause of troubles on 1.0 was poor supply of 3.3v through the board, and that one fix was to hook directly to the 3.3v of the PSU. Perhaps running a jumper wire from the 3.3v pin of the ATX connector to the respective pin(s) of the AGP connector would solve this. I'm going to have to try this on my P6DBE.
I've been running a 128MB Gainward Geforce FX5700 for a little while with my SE440BX2 board (3.3V AGP 1.0)... It's been fine so far 😀.