First post, by stamasd
I have a FIC 486-GVT-2 motherboard that I have purchased on another forum. I know the seller and he's reliable, I have purchased other items from him and had no problem. Here's the issue. The motherboard was sold as-is, because it came without jumpers. Supposedly the motherboard was in working condition, but then a sudden need for jumpers arose at some point in the past, and it was stripped of all jumpers - and that's why it was sold as-is. Now, this motherboard takes a LOT of jumpers. I have found the original documentation and set most of the jumpers. The problem is, not all jumpers are documented; there are several that I have no indication on what they do and how they should be set. I tried several combinations, but the motherboard won't POST. The best I got is the keyboard lights flashing once, but no video output.
I would really appreciate if there is someone here who has this motherboard in working condition, if they could take pictures of all the jumpers so I know what to do about the undocumented ones.
Thanks!
I/O, I/O,
It's off to disk I go,
With a bit and a byte
And a read and a write,
I/O, I/O