voodoo 5 and dxdiag \ VOGONS

voodoo 5 and dxdiag

Topic actions

Post a reply

First post, by heretic

Posted on 2016-07-17, 12:10

heretic Offline

Rank Newbie

Rank: Newbie
Posts: 41
Joined: 2013-09-25, 18:11

I noticed that dxdiag shows empty lines for chip type and dac type on my retro pc with voodoo 5 5500 . As i recall it should say something like chip type: vsa 100 and dac: internal. Can anyone confirm if this is correct or wrong? My system specs are: windows 98se, latest 3dfx official driver and directx 8.1.

Here is dxdiag log:

1---------------
2Display Devices
3---------------
4        Card name: Voodoo5 5500 AGP
5     Manufacturer: 3dfx Interactive, Inc.
6        Chip type: 
7         DAC type: 
8        Device ID: Enum\PCI\VEN_121A&DEV_0009&SUBSYS_0002121A&REV_01\000800
9   Display Memory: 30.5 MB
10     Current Mode: 1024 x 768 (32 bit)(optimal refresh rate) 
11          Monitor: W2286
12  Monitor Max Res: 1600,1200
13      Driver Name: 3dfx16vs.drv
14   Driver Version: 4.12.01.0666 (English)
15      DDI Version: 7
16Driver Attributes: Final Retail
17 Driver Date/Size: 11/2/2000 13:16:08, 442728 bytes
18    Driver Signed: No
19  WHQL Date Stamp: None
20              VDD: *vdd
21         Mini VDD: 3dfxvs.vxd
22    Mini VDD Date: , 0 bytes
23Device Identifier: {D7B71CFA-4349-11CF-3073-0320A2C2C935}
24        Vendor ID: 0x121A
25        Device ID: 0x0009
26        SubSys ID: 0x0002121A
27      Revision ID: 0x0001
28         Registry: OK
29     DDraw Status: Enabled
30       D3D Status: Enabled
31       AGP Status: Not Available
32DDraw Test Result: 
33 D3D7 Test Result: 
34 D3D8 Test Result:

Reply 1 of 1, by Arctic

Posted on 2016-07-17, 12:55

Arctic Offline

Rank Oldbie

Rank: Oldbie
Posts: 711
Joined: 2015-01-13, 19:32

It's displayed correctly.
The Voodoo 5 5500 has SLI and 32MB per chip. Direct X can only see the 32MB.

It's one of the classic 3dfx FAQ 😁

Go to top of page Go to top of page

Back to General Old Hardware

Main menu

Common searches