First post, by AlucarD86
- Rank
- Member
So I recently bought two Diamond Monster 3d II 3dfx Voodoo 2 8MB cards and they are both in mint conditions and came with the passthrough cable and the ribbon connector for SLI.
Now I have noticed that there are 3 main chipsets on each card which arent cooled at all, not even passive cooled, same as with the matrox M3D
What I want to know is, can someone recommend a decent cooling solution for those chipsets on the Voodoos and the Matrox M3D ? since its 1st of june and summer and its getting pretty hot here I was wondering on how to cool them properly. I already have my case open but some advice on how to apply a passive cooler to those plastic chipsets and what pads to use would be very helpful.
PC Setup: Mainboard ASUS CUBX | CPU Intel Pentium III-S Tualatin 1.4 GHz | Memory 780 MB SDRam | Soundcard Creative SB Audigy SB0160 | GPUs Nvidia FX5900 Ulta Matrox M3D PCI | HDD 2x40 GB WD/Seagate | OS Win98SE and WinXPSP1 in dual boot