So what's possible to do with this computer ?

Discussion about old PC hardware.

Re: So what's possible to do with this computer ?

Postby Elia1995 » 2017-12-07 @ 10:35

It freezes if I press Enter or if I press F3 to quit the install, so I can't do anything from the floppied DOS, because when I boot the PC with the floppy inside, it automatically launches this blue screen installer, which freezes with whatever key I press, I think I'll have to format it the hard way (install the hardisk in my main desktop with an IDE-SATA adapter, format it and place manually all the files DOS needs, setting the partition as bootable, obviously... well, thinking about it, it would also be much useful to quickly backup files directly in my PC and put them again inside after I "reinstall" DOS, since DOS is an OS that doesn't really need a setup, but a bootable partition with autoexec.bat and config.sys)
Currently assembled vintage computers I own: 11

Most important ones:
A "modded" Olivetti M4 434 S (currently broken).
An Epson El Plus 386DX running MS-DOS 6.22 (currently broken).
Celeron Coppermine 1.10GHz on an M754LMRTP motherboard
User avatar
Elia1995
Oldbie
 
Posts: 612
Joined: 2016-4-21 @ 12:45
Location: Italy

Re: So what's possible to do with this computer ?

Postby Kubik » 2017-12-07 @ 11:32

Press and hold Shift when floppy boots, that skips autoexec/config.
Kubik
Newbie
 
Posts: 55
Joined: 2017-11-06 @ 08:24

Re: So what's possible to do with this computer ?

Postby derSammler » 2017-12-07 @ 12:08

You would press and hold F5 to skip startup files.
derSammler
Member
 
Posts: 475
Joined: 2017-4-14 @ 11:30
Location: Germany

Re: So what's possible to do with this computer ?

Postby dr.ido » 2017-12-08 @ 11:20

Apple's 64 pin SIMMs are dual ported. I'm not sure they are the same as the ones in your AST - I can't read the part numbers in the pic. NCR also used 64 pin SIMMs, I have some I pulled from on old NCR server that was getting scrapped (I would have taken the whole thing, but someone had already removed the non standard power supplies, and it was still too heavy to move).
dr.ido
Newbie
 
Posts: 4
Joined: 2017-12-01 @ 12:55

Re: So what's possible to do with this computer ?

Postby brostenen » 2017-12-08 @ 11:36

Have you checked the controller by using a different harddrive? As I understand it, you are basically using an SATA harddrive on the computer, through an SATA to PATA converter.

Test with different IDE cables as well, and to be absolutely shure, test with a different floppy cable and a different floppy drive. Mix it, in order to test as many different combinations as possible.
Don't eat stuff off a 15 year old never cleaned cpu cooler.
Those cakes make you sick I tell.... (never tried though)

My blog: http://to9xct.blogspot.dk

001100 010010 011110 100001 101101 110011
User avatar
brostenen
l33t
 
Posts: 4129
Joined: 2014-5-07 @ 21:13
Location: Northern Jutland, Denmark.

Re: So what's possible to do with this computer ?

Postby jade_angel » 2017-12-08 @ 21:02

A note on the HIMEM.SYS/EMM386.EXE weirdness: in DR-DOS, HIMEM.SYS is only used on 286 systems. EMM386.EXE is used for 386 and later, though there's a way to disable EMS. (Look at the docs, or run it with /?).

I still think your memory might be defective, however.
Wintendo: Core i3-6100 | GTX 960
Linux Box: Core i5-4760K | GTX 550 Ti
98/2000 Box (Broken): K6-III+/500 | G400 MAX
PCI DOS Box: 5x86/133 | S3 Trio64/V2 PCI
VLB DOS box: 486DX4/100 | Cirrus GD5428 2MB
User avatar
jade_angel
Member
 
Posts: 349
Joined: 2017-1-03 @ 00:10
Location: Virginia

Re: So what's possible to do with this computer ?

Postby derSammler » 2017-12-08 @ 21:33

jade_angel wrote:EMM386.EXE is used for 386 and later, though there's a way to disable EMS. (Look at the docs, or run it with /?).

So you can't have real mode with XMS? No surprise that DR-DOS never had any market share.
derSammler
Member
 
Posts: 475
Joined: 2017-4-14 @ 11:30
Location: Germany

Re: So what's possible to do with this computer ?

Postby brostenen » 2017-12-08 @ 23:21

derSammler wrote:
jade_angel wrote:EMM386.EXE is used for 386 and later, though there's a way to disable EMS. (Look at the docs, or run it with /?).

So you can't have real mode with XMS? No surprise that DR-DOS never had any market share.


Yup... I remember people having trouble with DR or Novell Dos back in 1995.
It was a long antisipated release, that was a big bummer and let down.
If it was DR or Novell I just don't recall. I only remember people were displeased with it.
I don't even recall what the exact issue was.
Don't eat stuff off a 15 year old never cleaned cpu cooler.
Those cakes make you sick I tell.... (never tried though)

My blog: http://to9xct.blogspot.dk

001100 010010 011110 100001 101101 110011
User avatar
brostenen
l33t
 
Posts: 4129
Joined: 2014-5-07 @ 21:13
Location: Northern Jutland, Denmark.

Re: So what's possible to do with this computer ?

Postby Elia1995 » 2017-12-09 @ 07:23

I'd be better install 6.22, at that point.

EDIT
Since I've been having all these troubles installing 6.22, I'll try with FreeDOS 1.2, using the boot floppy and the legacy version from the LPT CD-ROM drive.
Currently assembled vintage computers I own: 11

Most important ones:
A "modded" Olivetti M4 434 S (currently broken).
An Epson El Plus 386DX running MS-DOS 6.22 (currently broken).
Celeron Coppermine 1.10GHz on an M754LMRTP motherboard
User avatar
Elia1995
Oldbie
 
Posts: 612
Joined: 2016-4-21 @ 12:45
Location: Italy

Re: So what's possible to do with this computer ?

Postby jade_angel » 2017-12-11 @ 13:30

derSammler wrote:
jade_angel wrote:EMM386.EXE is used for 386 and later, though there's a way to disable EMS. (Look at the docs, or run it with /?).

So you can't have real mode with XMS? No surprise that DR-DOS never had any market share.


You can, actually, you just can't use HIMEM and EMM386 at the same time. Despite having the same names as in MS-DOS, they're mutually exclusive. A dorky idea on their part :/ DR-DOS's memory managers are downright hinky - http://www.drdos.net/documentation/usergeng/10ugch10.htm.
Wintendo: Core i3-6100 | GTX 960
Linux Box: Core i5-4760K | GTX 550 Ti
98/2000 Box (Broken): K6-III+/500 | G400 MAX
PCI DOS Box: 5x86/133 | S3 Trio64/V2 PCI
VLB DOS box: 486DX4/100 | Cirrus GD5428 2MB
User avatar
jade_angel
Member
 
Posts: 349
Joined: 2017-1-03 @ 00:10
Location: Virginia

Re: So what's possible to do with this computer ?

Postby Elia1995 » 2017-12-11 @ 17:25

Any way to install the original HIMEM.SYS and EMM386.EXE ?
I tried loading the Dos 7.10's ones from the dconfig.sys, but on boot it says that EMM386 isn't installed.
Currently assembled vintage computers I own: 11

Most important ones:
A "modded" Olivetti M4 434 S (currently broken).
An Epson El Plus 386DX running MS-DOS 6.22 (currently broken).
Celeron Coppermine 1.10GHz on an M754LMRTP motherboard
User avatar
Elia1995
Oldbie
 
Posts: 612
Joined: 2016-4-21 @ 12:45
Location: Italy

Re: So what's possible to do with this computer ?

Postby jade_angel » 2017-12-11 @ 18:13

You could copy them over from an MS-DOS or PC DOS system, I suppose. I never tried that, but at that point, you might as well just install MS-DOS or PC DOS. (I like PC DOS 2000, personally, but there's nothing wrong with MS-DOS 6.22 or Win98 DOS)
Wintendo: Core i3-6100 | GTX 960
Linux Box: Core i5-4760K | GTX 550 Ti
98/2000 Box (Broken): K6-III+/500 | G400 MAX
PCI DOS Box: 5x86/133 | S3 Trio64/V2 PCI
VLB DOS box: 486DX4/100 | Cirrus GD5428 2MB
User avatar
jade_angel
Member
 
Posts: 349
Joined: 2017-1-03 @ 00:10
Location: Virginia

Previous

Return to General Old Hardware

Who is online

Users browsing this forum: Baidu [Spider] and 9 guests