VOGONS

Powering a Supermicro P3TDDE

Topic actions

First post, by MII-233

Posted on 
User metadata
Rank Newbie
Rank
Newbie

So I'll be getting a P3TDDE soon-ish, and I need to power it. Ideally I'd like to get a power supply capable of handling a pair of 1.4GHz P3's, an X1650 Pro, and a slew of PCI cards, but for now that's out of the budget. I'm curious to see if anyone knows of an adapter for that annoying 6 pin supplemental that I could use with a modern PSU. I know it's less than ideal, but for now it's just about my only option (and I'll be sure to run fairly low-power hardware so that I don't run out of power on the 5V side of things).

Also sorry for the poor picture, but I don't have the board yet and honestly that's the best picture I could find.

unknown.png

Zenith: 2x 1266MHz PIII, Supermicro P3TDDE, 1x 512MB PC133 ECC, Radeon 9600 Pro 128MB, 80GB Barracuda 7200.9 (OS+Programs) + 160GB Maxtor Diamondmax Plus 9 (games), Windows XP Pro SP3

944TreU.gif

Reply 2 of 2, by MII-233

Posted on 
User metadata
Rank Newbie
Rank
Newbie
PC Hoarder Patrol wrote:

Something like this

https://www.atxpowersupplies.com/6-pin-aux-co … tor-adapter.php

Jeeeslus that's expensive. Good thing I don't actually need an adapter because as it turns out, I forgot I had an old RV350 that has that connector.

I do appreciate the help though, even though in the end I ended up not needing it. 😀

Zenith: 2x 1266MHz PIII, Supermicro P3TDDE, 1x 512MB PC133 ECC, Radeon 9600 Pro 128MB, 80GB Barracuda 7200.9 (OS+Programs) + 160GB Maxtor Diamondmax Plus 9 (games), Windows XP Pro SP3

944TreU.gif

Go to top of page Go to top of page
Back to General Old Hardware
Close window
Close window