First post, by pan069
- Rank
- Oldbie
I have this old Lucky Star 5I-VX1F board with a Pentium MMX in it and I also have a few 80GB Seagate hard drives lying around which to my knowledge all work fine.
However, when I connect the drive to the board it's doing the "Detecting primary master [press F4 to skip]" thing and it just sits there. Pressing F4 doesn't skip, however, Del brings me to the CMOS settings. I have tried a few drives, all the same behaviour.
I have tested another much older drive on the board that one boots fine so I know the board is definitely OK.
Is there a way to get an 80GB HDD to work on an older board, even if you have sacrifice drive space to do so?
Thanks,
Luke