First post, by bergqvistjl
- Rank
- Member
I'm building up a Jetway J-542B system, and looking at the manual: http://www.elhvb.com/mobokive/Archive/Jetway/ … nual/index3.htm on page 7, it seems that for a 500Mhz AMD K6-2, i'd need to set the FSB to 100Mhz, and the clock ratio to 5.0? Is that correct? (along with the voltage to 2.2v (as specified on the CPU itself)
Is that correct? I'm not familiar with the triptych of Voltage, FSB & clock ratio, and how they relate re. over/underclocking & not frying stuff. I'd just like to run the CPU at the stock 500Mhz.