First post, by moawkwrd
Hi,
I recently grabbed a Pentium II 450MHz to upgrade my 350MHz off eBay for £8 - was excited for the 28% speed increase!!!
However, I've swapped it over today and it's causing all sorts of errors - memory problems, graphics distortions, system hangs, CMOS errors, etc. Is there some special procedure I should've done? Physically it looks fine, nothing obviously different - I changed the jumpers on my 440 motherboard to the correct ratio. I cleared the CMOS battery and reset settings to default.
Is it just faulty?
Xeon E3-1241v3 - 16GB DDR3 - Vega 56 - W10
PII 450MHz - 256MB SDRAM - Voodoo 3 3000 PCI - W98SE