Using an IDE - Compact Flash adapter - what kind of card do I need? DOS machine. \ VOGONS

Using an IDE - Compact Flash adapter - what kind of card do I need? DOS machine.

Topic actions

Post a reply

First post, by tomexplodes

Posted on 2020-10-23, 20:06

tomexplodes Offline

Rank Member

Rank: Member
Posts: 159
Joined: 2016-08-21, 05:32
Location: Syracuse, NY

Does it matter if it is set to removable or fixed disk for DOS? This https://www.amazon.com/Verbatim-2GB-CompactFl … /dp/B00009967Y/ is the cheapest card I've found but apparently it's not a fixed disk? I just want to use compact flash instead of a HDD for the speed benefits, especially for Ultima VII. Okay, that's it I think. Thanks!

oh this is the adapter I ordered: https://www.amazon.com/gp/product/B0026OYEEQ/

1.) MS-DOS 6.22, Pentium 233mhz, 32mb RAM, S3 Trio64, Sound Blaster Pro 2
2.) Windows 98SE with Unofficial SP3, AMD Athlon 1.3ghz, 768mb RAM, Geforce 4 MX 440 64mb AGP, Sound Blaster Live! Value

Reply 1 of 4, by kolderman

Posted on 2020-10-23, 20:16

kolderman Offline

Rank l33t

Rank: l33t
Posts: 2468
Joined: 2019-05-12, 04:22

They appear like normal HDDs, not removable devices. They natively support IDE.

Reply 2 of 4, by tomexplodes

Posted on 2020-10-23, 20:16

tomexplodes Offline

Rank Member

Rank: Member
Posts: 159
Joined: 2016-08-21, 05:32
Location: Syracuse, NY

Okay, so I can pop it in as a second hard drive and move everything over to it no problem?

1.) MS-DOS 6.22, Pentium 233mhz, 32mb RAM, S3 Trio64, Sound Blaster Pro 2
2.) Windows 98SE with Unofficial SP3, AMD Athlon 1.3ghz, 768mb RAM, Geforce 4 MX 440 64mb AGP, Sound Blaster Live! Value

Reply 3 of 4, by kolderman

Posted on 2020-10-23, 20:20

kolderman Offline

Rank l33t

Rank: l33t
Posts: 2468
Joined: 2019-05-12, 04:22

tomexplodes wrote on 2020-10-23, 20:16:

Okay, so I can pop it in as a second hard drive and move everything over to it no problem?

Sure. Are you planning on formatting it first or within this DOS PC? It should not matter but make sure FAT16 and max partition size of 2GB.

Reply 4 of 4, by tomexplodes

Posted on 2020-10-23, 20:28

tomexplodes Offline

Rank Member

Rank: Member
Posts: 159
Joined: 2016-08-21, 05:32
Location: Syracuse, NY

I was going to format it in the DOS PC and copy everything over to it with xcopy. Also, it's a 2gb card so the partition size is no problem.

EDIT Though I might just format it in the DOS PC and then use my Windows 98 machine to copy the old hard drive over for the sake of ease.

1.) MS-DOS 6.22, Pentium 233mhz, 32mb RAM, S3 Trio64, Sound Blaster Pro 2
2.) Windows 98SE with Unofficial SP3, AMD Athlon 1.3ghz, 768mb RAM, Geforce 4 MX 440 64mb AGP, Sound Blaster Live! Value

Go to top of page Go to top of page

Back to General Old Hardware

Main menu

Common searches