Reply 40 of 42, by chrisNova777
- Rank
- Oldbie
wrote:I had the same problem. This is what I found with regards to the wiring of the StarTech cables: red - gnd brown - data yellow […]
I had the same problem. This is what I found with regards to the wiring of the StarTech cables:
red - gnd
brown - data
yellow - clock
green - +5V
I plugged the individual cables onto their respective pins on the board and it worked with my Intelli PS/2 Mouse.
i just got a multimeter and the colors of my ps2 are different - either that or ive made some type of error
but my findings have the yellow + brown swapped, ive checked a few times and its true
5V+ green
CLK brown
GND red
DAT yellow
i keep experimenting and i still cant get a mouse working.. my system is freezing.. i think maybe the ps2 fuse is blown on my board? would that cause a system lock up?
http://www.oldschooldaw.com | vintage PC/MAC MIDI/DAW | Asus mobo archive | Sound Modules | Vintage MIDI Interfaces
AM386DX40 | Asus VL/I-486SV2GX4 (486DX2-80) | GA586VX (p75) + r7000PCI | ABIT Be6 (pII-233) matroxG400 AGP