Worked on my Tillamook again a bit after it seems too work fine on Asus XP55T2P4 Rev. 3.0
On my ASUS P/I-P55T2P4 (rev.3.1) it gave freezes in some games or already when trying to load autoexec and config.
Both need L2 mod of course, BF2 "extended mod" and VCC2DET mod as both boards will not recognize dual rail cpu and send 3.2v core voltage.
I haven't applied the VCC2DET before on the Asus XP55T2P4, where it seems to work fine without BUT probing the core voltage showed 3.2v ouuuups. So far the system was able to run my simple benchmark and game tests without showing any issue why I thought everything was okay... but it wasn't...
On the P/I-P55T2P4 the high single rail voltage was crashing always after a few seconds or minutes.... why I was wondering after it "worked" on the ATX version of the Board.
So far, probing the voltage showed the problem and thanks to the guys here, I was able to troubleshoot and to fix...
mobile.442.shareddzjtu.jpeg
Tillamod.png
OC 266@300 running 4x75Mhz
IMG_5997.jpg
IMG_5998.jpg
IMG_5999.jpg