First post, by weldum
- Rank
- Member
Hi, i have a packard bell force 325 which has currently 4mb of ram, 2mb soldered on board and 2mb in two 1mb simm30 modules.
However the motherboard has the markings to solder 4 slots more, making it 8 in total (4 currently populated now)
My question is if it would be so simple as to solder a slot and so on or there are some modifications or considerations to take in account.
Specs:
Motherboard PCB-03 (?)
CPU 386SX 25
Thanks.
DT: R7-5800X3D/R5-3600/R3-1200/P-G5400/FX-6100/i3-3225/P-8400/D-900/K6-2_550
LT: C-N2840/A64-TK57/N2600/N455/N270/C-ULV353/PM-1.7/P4-2.6/P133
TC: Esther-1000/Esther-400/Vortex86-366
Others: Drean C64c/Czerweny Spectrum 48k/Talent MSX DPC200/M512K/MP475