SCSI CD-ROM under DOS \ VOGONS

SCSI CD-ROM under DOS

Topic actions

First post, by dominusprog

Posted on 2024-05-26, 21:31

dominusprog Offline

Rank Member

Rank: Member
Posts: 495
Joined: 2022-07-02, 00:52
Location: Innsmouth

Recently I've bought a Initio INI-9100 PCI SCSI controller and a TEAC CD-ROM, and I want to use the CD-ROM with a DOS 6.22 boot disk. I've put the driver on CONFIG.SYS and it detects the CD-ROM but MSCDEX can't initialize it. Any ideas?

1DEVICE=CUNI_ASP.SYS
2DEVICE=ISPI910.SYS /D:SCSICD

A-Trend ATC-1020 V1.1 ❇ Cyrix 6x86 150+ @ 120MHz ❇ 32MiB EDO RAM (8MiBx4) ❇ A-Trend S3 Trio64V2 2MiB
Aztech Pro16 II-3D PnP ❇ 8.4GiB Quantum Fireball ❇ Win95 OSR2 Plus!

Reply 1 of 1, by dominusprog

Posted on 2024-05-26, 22:00

dominusprog Offline

Rank Member

Rank: Member
Posts: 495
Joined: 2022-07-02, 00:52
Location: Innsmouth

Fixed, it was missing the config file.

A-Trend ATC-1020 V1.1 ❇ Cyrix 6x86 150+ @ 120MHz ❇ 32MiB EDO RAM (8MiBx4) ❇ A-Trend S3 Trio64V2 2MiB
Aztech Pro16 II-3D PnP ❇ 8.4GiB Quantum Fireball ❇ Win95 OSR2 Plus!

Go to top of page Go to top of page

Back to General Old Hardware