Just bought one PC100 64MB stick, my mobo does support setting up the CAS to 2. 😀 Will repost results then.

I can't fit any of those CPU as my board is not SS7 (it supports multiplier up to 5.5 and FSB up to 83MHz)

olivil wrote:

I can't fit any of those CPU as my board is not SS7 (it supports multiplier up to 5.5 and FSB up to 83MHz)

Yes you can 😉
The main important thing is, can your board supply a low enough voltage for these chips? 2.2v and the K6-III is within your reach.
For example, you can run a K6-III/400 @ 6x66Mhz for 400Mhz (for the x6 multi, set your boards multi at 2x) 😉.

My life is changed, I am a new man.

olivil wrote:

My life is changed, I am a new man.

When trying to hammer that K6 into your board, you got electrocuted??

Actually I went OCD and found an Asus P5A-B SS7 board with an AMD K6-2/450. 😀 Should receive it soon!

e: And a K6-2/550

e2: AND A TNT2 OH GOD WHAT IS HAPPENING

You should try finding a K6-III. Even though the K6-2/550 is the fastest K6-2 ever released, they are still quite common (Don't we love fast retro things that are common 😀 ).

just got my 386 system up and running and 95% functional.

AMD-386DX-40-1-40-Contaq-Contaq 386-SIS 85C206-256KB-ISA-Orcid Prodesigner IIs (tseng et4000)-1MB-Luckybob-16.9

Done with a fresh install of doss 6.22 and nothing else. not even a mouse driver. I used a cyrix math-co instead of an intel math-co which might explain why my score is different than doughnut's...

Good to see another 386 score. However I don't think the math-co is used in this benchmark...

as soon as I get some fresh batteries i'll post some pictures!

I think my board is just the runt of the litter.... 😜

What sort of RAM are you using, and what wait states have you set in the BIOS?
Have you fiddled with the ISA bus jumpers at all?

i have 32mb of 60ns ram. the isa bus is set to i *think* 16mhz. I got graphical glitches at 20mhz. and I have it set to "automatic" on the memory section.

Who says that the M919 is crappy???

Cyrix-5x86-60-2.0-120-PCChips-M919-UMC UM8881-None-PCI-S3 ViRGE-2MB-sebaz_ri-83.3

PCChips M598LMR:

Intel-Pentium-66-2.0-133-PCChips-M598LMR-SiS 530-512KB-PCI-Trident 9685-2MB-sebaz_ri-90.9

Here's mine 😀

Intel-Pentium_II-100-3.5-350-MSI-MS_6119-440BX-512k-AGP-3dfx_Voodoo3_2000-16MB-jwt27-539.9

And here's the same system with a P3-450:

Intel-Pentium_III-100-4.5-450-MSI-MS_6119-440BX-512k-AGP-3dfx_Voodoo3_2000-16MB-jwt27-674.1

edit: WTF, did I just beat a 1000MHz P3 😳

jwt27 wrote:

And here's the same system with a P3-450:

Intel-Pentium_III-100-4.5-450-MSI-MS_6119-440BX-512k-AGP-3dfx_Voodoo3_2000-16MB-jwt27-674.1

edit: WTF, did I just beat a 1000MHz P3 😳

🤣, you beat my PIII-S 1400MHz also with a V3. Something I'm doing wrong. Lets see. Probably something to do with fastvid.

With fastvid.bat+3dbench2.bat I get 151.0
With just 3dbench2.bat I get 539.3

Followed the instuctions to a T 😁

Anyways, Socket 370 obviously.

Intel-Pentium 3S-133-10.5-1400-ASUS-CUSL2-CB-Intel 815EP-None-AGP-Voodoo 3 3000-16MB-RogueTrip2012-539.3

oldschool test result:
Intel-8088-5-1-16-clone PC XT -cpuupgradecard: Inboard 386/pc-?-0-ISA 8bit-ATI mach32-0.5 Mb Vram-cimonvg-4.3
😀

IBM-6x86MX PR200-66-2.5-166-Jetway-J5TXC-Intel TX-512KB-PCI-Matrox Millennium II-4MB-SquallStrife-234.6

Just having a look at the OP, it seems like my 6x86 actually performs rather well for its meagre 166MHz clock speed!

Will it be updated some time? I can see a lot of scores that aren't on that score sheet.

Hi!

It ended up being lots of work and I don't have the time to update it anymore. Hoping that someone might do a database driven site which allows adding new results?