I'll have to burn through your work in a day or two; I'm pretty busy today. Here is a more specific list of exactly what I am testing for. If you could replicate these conditions, that would be fantastic. This way, I can add your results to the sheet if I cannot get my X5 running at 200 Mhz. I haven't gotten this far yet. It has taken a lot more time that I first thought to work through all these tests on 2 dozen cpus.
***DOS***
1) Symantec (Norton) Sysinfo v8.0 (arb. units)
2) PC-Config v9.33 (% of Pentium 100)
3) Cpu Index v2.3 (arb. units)
4) PiDos [25k digits] (seconds)
5) Landmark v2.0 - ALU, FPU, Video
6) Justin Benchmark Dos v1.0 - Memory and Floating Point
7) Bytemark v2.0, 32-bit DOS - All items, everything quoted in (iterations/second), except for the final Integer/Floating Point index, which should be quoted in (normalized index of P90)
Roy Longbottom
8) DHRY1OD (VAX MIPS Rating)
9) LINPCOD (MFLOPS)
10) WHETCOD - all items quoted in MFLOPS and MOPS
11) Speedsys v4.78 - General score, Video bandwidth, system bandwidth, L1, L2 cache, and ave. RAM speed
12) Cachechk v4.0 - L1, L2, Memory, Ram access time (read and write)
13) 3dBench v1.0 or 1.0c
14) Doom v1.9s timedemo demo3
15) pcpbench v1.04 (VESO Modus 100, 640x480 8bpps LFB)
16) Quake v1.06 timedemo demo1
***Windows 98SE***
17) SuperPi v1.1 (32k digits)
18) Justin Benchmark Win v1.0 - all items, averaged over 3 trials
19) Ziff-Davis Winbench 96 v1.0 - CPUmark32 and Graphics Winmark
(make sure you right click your taskbar, properities, and uncheck "always on top" for the graphics winmark to work)
Ziff-Davis Winbench99 v1.1
20) CPUmark99 -v1.0, this is the standalone addition, not bundled with Winbench99
21) FPU WinMark99 v1.1, this is the edition bundled with Winbench99 v1.1
22) WinTune98 - Integer (MIPS), FLoating Point (MFLOPS), Video2D (Mpixels/s), Direct3D (Mpixels/s), OpenGL (Mpixels/s), Memory (MB/S) - It is easiest to refer to the html the program creates after running the tests.
23) Sandra99 - CPU ALU/FPU, Multi-Media ALU/FPU, Memory ALU/FPU
24) PassMarkv4.0 - 2D graphics Mark, Memory Mark, Math Mark, Integer Add/subtract/multiply/divide, and FPU Add/subtract/multiply/divide, and Max Math MFLOPS.
25) 3DMark99Max or Lite - If you can get it to finish.
FYI, Cyrix 5x86-120 gets 17.2 fps in quake, X5-160 gets 17.3 fps, POD83 gets 19.7, and POD100 gets 23.6.