VOGONS

Search

Common searches

Looking for a Mitsumi LUOO2S CDROM driver for DOS.

Topic actions

First post, by maddmaxstar

Posted on 
User metadata
Rank Member
Rank
Member

Got another question.

I have an ancient Mitsumi 1x CRMC-LUOO2S CDROM drive with the 741024A 8bit ISA controller card. I've had these for years and worked last time I had them and put them into storage, however I've misplaced the DOS driver and can no longer get them to run.

I've located a DOS driver online for the LUOO5S's Controller, and doesn't appear to be working, however the controller for the LUOO5S appears to be 16bit ISA and it's drivers may not work with my drive.

So, my question becomes this: Does anyone have a DOS driver for the LUOO2S drive?

Also, I have the option of using the Mitsumi connector on my SB16 CT2230, will the SBCD.sys driver for SB16's work with this drive?

I'll attach a photo of the drive in question.

Thanks in advance,
-MaX

Attachments

  • Filename
    DSCF2799.JPG
    File size
    2.03 MiB
    Downloads
    201 downloads
    File license
    Fair use/fair dealing exception

Reply 1 of 8, by maddmaxstar

Posted on 
User metadata
Rank Member
Rank
Member

Closeup of the controller card. Looking it over, I think the settings are:

DMA 3
IRQ 3
Address: 3F0h - though I'm honestly not sure.

Attachments

  • Filename
    DSCF2800.JPG
    File size
    2.55 MiB
    Downloads
    197 downloads
    File license
    Fair use/fair dealing exception

Reply 3 of 8, by Mau1wurf1977

Posted on 
User metadata
Rank l33t++
Rank
l33t++

Oh man that drive brings back memories...

It was my first CD-Rom. Single speed, but still the start of a new era.

My website with reviews, demos, drivers, tutorials and more...
My YouTube channel

Reply 4 of 8, by maddmaxstar

Posted on 
User metadata
Rank Member
Rank
Member

Man you guys are quick and awesome. I'll give the drivers a try in a bit.

I got this drive over 10 years ago from a friend of mine who was it's original owner. It's been more of a conversation piece but it'd be cool to get it working again. I'd like to have it working on it's own controller card as I was hoping to use my SBPro2 on the machine instead of the SB16.

= Phenom II X6 1090T(HD4850) =
= K7-550(V3-3000) =
= K6-2+ 500(V3-2000) =
= Pentium 75 Gold(Voodoo1) =
= Am486DX4-120(3DXpression+) =
= TI486DLC-40(T8900D) =
= i386sx-16+i387(T8900D) =

Reply 5 of 8, by maddmaxstar

Posted on 
User metadata
Rank Member
Rank
Member

It worked! Device settings on the card were IRQ3, DMA3 and Address 300h. Worked like a charm after running the installer with the defaults set. Doesn't read CD-R's though.

= Phenom II X6 1090T(HD4850) =
= K7-550(V3-3000) =
= K6-2+ 500(V3-2000) =
= Pentium 75 Gold(Voodoo1) =
= Am486DX4-120(3DXpression+) =
= TI486DLC-40(T8900D) =
= i386sx-16+i387(T8900D) =

Reply 6 of 8, by Mau1wurf1977

Posted on 
User metadata
Rank l33t++
Rank
l33t++

I remember it came with a MS-DOS application for listening to an Audio CD. And this drive was the fastest at changing tracks 😀 It was almost instantaneous...

My website with reviews, demos, drivers, tutorials and more...
My YouTube channel

Reply 8 of 8, by maddmaxstar

Posted on 
User metadata
Rank Member
Rank
Member

I used the driver with the original controller card, I didn't try it with the CT2230. No need to anymore, my i386sx is now running OK with a SB 2.0 (SBPro didn't work), the drive was even able to read a burnt CD with Win3.11 install files on it.

Go to top of page Go to top of page
Back to General Old Hardware
Close window
Close window