Reply 140 of 371, by tyuper
feipoa,
I have problem with running the ELSA Synergy II-32 (Riva TNT2) in DTK PKM-0033S. The card won't display anything, but motherboard is working fine (I hear POST OK beep, HDD loading OS etc.) When I put ISA VGA to check TNT2's logical presence on PCI bus with DOS tool (PCI.EXE V2.2 by PCD Systems Engineering), then it states that card is detected and it properly gives configuration registers. And there's one difference in registers I have noticed when the card was in 440BX motherboard: it is PCI bus master, while on PKM-0033S it doesn't.
And there's my question: could you share modfied BIOS, so I could check if this is right direction to get TNT2 working in PKM-0033S?