Keyboard not detected on AT board \ VOGONS

Keyboard not detected on AT board

Topic actions

Post a reply

First post, by vetz

Posted on 2013-08-21, 17:50

vetz Offline

Rank l33t

Rank: l33t
Posts: 4159
Joined: 2012-04-23, 17:13

Bought this board on Ebay. It is an Intel Socket 5 Premiere/PCI II Baby-AT Board :

I get a "keyboard not detected" error on boot and no key responds to input. None of the Num lock, Caps lock or Scroll lock button lights light up. I cannot see any damage on the AT connector. Any hints or tips? Is it possible to use a serial keyboard of some sort or am I out of luck?

3D Accelerated Games List (Proprietary APIs - No 3DFX/Direct3D)
3D Acceleration Comparison Episodes

Reply 1 of 3, by socram8888

Posted on 2013-08-21, 18:37

socram8888 Offline

Rank Newbie

Rank: Newbie
Posts: 23
Joined: 2013-08-02, 20:43

Have you tried measuring the voltage in the AT socket?

Reply 2 of 3, by h-a-l-9000

Posted on 2013-08-21, 19:44

h-a-l-9000 Offline

Rank DOSBox Author

Rank: DOSBox Author
Posts: 4511
Joined: 2005-02-23, 00:14

Botton right is a yellow SMD tantalum capacitor. The silver part directly above could be a fuse.

1+1=10

Reply 3 of 3, by vetz

Posted on 2013-08-25, 17:46

vetz Offline

Rank l33t

Rank: l33t
Posts: 4159
Joined: 2012-04-23, 17:13

I got it working by bending the plug/cable upwards of the board. It is probably just bad connection somewhere in the plug. I can't see any visual damage though.

Anyway, will probably need to unsolder and solder on a new one.

3D Accelerated Games List (Proprietary APIs - No 3DFX/Direct3D)
3D Acceleration Comparison Episodes

Go to top of page Go to top of page

Back to General Old Hardware

Main menu

Common searches