Hi guys, this is my first post on this forum, but I am following the posts here for some time, always "on the window".
I have a CT4520 that I would like to configure on a P2@450Mhz system running Windows 98 SE, but I cant find anywhere the drivers. Can some one point me a good link to download the ISO?
At the moment, my W98 cant see the card.
Thanks for any kind help,
Jorge
In this section there are drivers for a lot of stuff.
And yes. If Win98 can not see the card at all.
There are a big problem somewhere.
Don't eat stuff off a 15 year old never cleaned cpu cooler.
Those cakes make you sick....
My blog: http://to9xct.blogspot.dk
My YouTube: https://www.youtube.com/user/brostenen
001100 010010 011110 100001 101101 110011
I would suspect capacitors, as I've had two AWE64 cards do that and the capacitors turned out to be the problem.
Though sometimes just starting the machine without the card once and then re-installing said card will make the problem go away - this goes for any card.
Hi guys! First of all, I want to thank all the kind and fast info that provided. Dont know why, after turn off and on the computer, the card was recognized. My problem is find a suitable driver for DOS 🙁
I am searching in the link that was kindly posted brostenen, next will try to find a tutorial. This card is an headache..
Yeah... PNP is sometimes a bitch. These drivers here, are MS-DOS-6.22 only...
(not Win95 and later, just 6.22 and earlier)
Install PNP manager first. They are from Phil's website.....
Don't eat stuff off a 15 year old never cleaned cpu cooler.
Those cakes make you sick....
My blog: http://to9xct.blogspot.dk
My YouTube: https://www.youtube.com/user/brostenen
001100 010010 011110 100001 101101 110011
