I havea few weeksago this PCI/EISA Mercury Socket 4 Mainboard with an EISA SCSI Controller (AMI Normal single ended eisa scsi caching controller). Is here anyone who knows how can i enter Bios from this controller to make settings?
Other Problem: Where can i get the .cfg File for EISA Settings?
Unfortunately, to change your EISA card settings you will need to boot from a floppy with the EISA configuration utility, and the CFG files for your motherboard and EISA card. I will look for them later.
"Will the highways on the internets become more few?" -Gee Dubya
V'Ger XT|Upgraded AT|Ultimate 386|Super VL/EISA 486|SMP VL/EISA Pentium
Anonymous Coward wrote on 2015-04-22, 00:49:Unfortunately, to change your EISA card settings you will need to boot from a floppy with the EISA configuration utility, and the CFG files for your motherboard and EISA card. I will look for them later.
Sorry for disturbing after 8 years. I just bought such card and afraid I don't have config for it. Do you still have one?
486: ECS UM486 VLB, 256kb cache, i486 DX2/66, 8MB RAM, Trident TGUI9440AGi VLB 1MB, Pro Audio Spectrum 16, FDD 3.5, ZIP 100 ATA
PII: Asus P2B, Pentium II 400MHz, 512MB RAM, Trident 9750 AGP 4MB, Voodoo2 SLI, MonsterSound MX300
Just in case - I found it here - among plenty of other EISA cfgs -http://66.113.161.23/~mR_Slug/EISA/!AMI15E1.CFG/
486: ECS UM486 VLB, 256kb cache, i486 DX2/66, 8MB RAM, Trident TGUI9440AGi VLB 1MB, Pro Audio Spectrum 16, FDD 3.5, ZIP 100 ATA
PII: Asus P2B, Pentium II 400MHz, 512MB RAM, Trident 9750 AGP 4MB, Voodoo2 SLI, MonsterSound MX300
