First post, by nuno14272
Hi there, my first post here. (i'm from portugal, my english is not great so sorry for that in advance).
I have a sharp pc-4600 - yes is a laptop - (model 4602), witch is a necv40 10mhz i8088 clone, with no hard-drive and two 720kb floppy drives.
theres the model 4610 witch is exacly the same as above but wit either a 20MB HD or a 40MB HD.
Now, i do not own a service manual for this computer and i was unable to find one for this model (well i did but is on several pay sites).
Meanwhile i have como across a full functional quantum Go Drive with 40MB space.. .
Is it possible to use this hard-drive and install it on the sharp ?? i mean, the sharp dont seens to use standart cables (i said that because considering the floppy drive cabes, they dont have a power plug, the data cable sends the power and the data.), and probably in order to the computer to know theres a hard-drive installed there's some resistor or capacitador i have to solder on the board...
Does anyone have an ideia ? thanks..
1| 386DX40
2| P200mmx, Voodoo 1
3| PIII-450, Voodoo 3 3000