First post, by vikhr

User metadata
Rank Newbie

Picked up a Pioneer DRM-604X at the local thrift store but I am at a dead end because I don't have any of the drivers for it. Went to Pioneers website but they don't have it listed anywhere on their site. Does anyone have the drivers or can point me in the right direction on where to acquire them?

Reply 1 of 4, by darry

User metadata
Rank l33t++

It is a SCSI drive, so, under DOS, you only need an ASPI driver for your SCSI card and an ASPI CD driver (such as aspicd.sys), which are the same requirements as any SCSI CD-ROM . Under Windows 9X or higher, it should be detected automatically if your SCSI card's Windows drivers are installed properly .

Reply 2 of 4, by PC Hoarder Patrol

User metadata
Rank Oldbie

This implies support from W95 (onwards)

http://www.pioneerelectronics.com/pio/pe/vgn/ … 22174237800.pdf

Some of these may also apply

https://web.archive.org/web/19980415050521/ht … com:80/tec.html

Reply 4 of 4, by sirlemonhead

User metadata
Rank Member

This any use? Found a disk for DOS/Windows and another one for MAC. Both saved as .IMA images. My phone is terrible so I can't take photos of the disks, so I typed the label text out (more or less) into .txt files.

There miiight be another disk somewhere with a different version of the drivers and maybe for other OSes. I'll have a poke around if you think it'd be useful.

https://www.dropbox.com/s/e27xooqf4kyalbk/Pan … ic%20Cd-ROM.zip