VOGONS


First post, by Cobra42898

User metadata
Rank Member
Rank
Member

815 board, 1ghz p3, 512 mb ram. Integrated video/audio/Ethernet.

I've had the board in a PC I've had since new in 2001. It was used heavily til about 2011, then I had it running again about two years ago. It was working perfectly until one time I went to turn it on, and nothing. Tried another good power supply, same thing. No LEDs on the board lit, nothing. I'm decent with a soldering iron, and I've read about caps going bad. Anything else to look for, or anything in particular about this board I need to know about? I know it's not that special as a board but I am a bit sentimental about it. Is it likely repairable?

Searching for Epson Actiontower 3000 486 PC.

Reply 1 of 1, by zyga64

User metadata
Rank Oldbie
Rank
Oldbie

Check CMOS battery first.

1) VLSI SCAMP /286@20 /4M /CL-GD5422 /CMI8330
2) i420EX /486DX33 /16M /TGUI9440 /GUS+ALS100+MT32PI
3) i430FX /K6-2@400 /64M /Rage Pro PCI /ES1370+YMF718
4) i440BX /P!!!750 /256M /MX440 /SBLive!
5) iB75 /3470s /4G /HD7750 /HDA