IBM 300GL 6282 error 67 \ VOGONS

IBM 300GL 6282 error 67

Topic actions

Post a reply

First post, by omarsis

Posted on 2018-12-30, 22:27

omarsis Offline

Rank Newbie

Rank: Newbie
Posts: 23
Joined: 2012-03-27, 15:21

Does anyone here have any experience with IBMs from around 1997/98? I have this IBM 300GL model 6282 that won't boot.
It crashes with the error or code number 67.

I changed the battery, clear the cmos config, changed the ram, I disconnected the hdd, I have no expansion cards.

Any ideas what's wrong here?

Video: https://youtu.be/m00e_mJF3bs

Reply 1 of 3, by oeuvre

Posted on 2018-12-31, 13:58

oeuvre Offline

Rank l33t

Rank: l33t
Posts: 3231
Joined: 2015-03-31, 13:31
Location: USA

It's related to the hard drive... reseat your IDE cable(s) and power connector(s), try another IDE cable if you can.

HP Z420 Workstation Intel Xeon E5-1620, 32GB, RADEON HD7850 2GB, SSD + HD, XP/7

Reply 2 of 3, by omarsis

Posted on 2018-12-31, 23:32

omarsis Offline

Rank Newbie

Rank: Newbie
Posts: 23
Joined: 2012-03-27, 15:21

I found what the problem was. I removed the COAST L2 cache module, re inserted and then it booted OK

Reply 3 of 3, by oeuvre

Posted on 2019-01-02, 14:02

oeuvre Offline

Rank l33t

Rank: l33t
Posts: 3231
Joined: 2015-03-31, 13:31
Location: USA

Nice!

HP Z420 Workstation Intel Xeon E5-1620, 32GB, RADEON HD7850 2GB, SSD + HD, XP/7

Go to top of page Go to top of page

Back to General Old Hardware

Main menu

Common searches