Hello Collegues,
I need bios bin for motherboard SNOBOL MINI 286 needed SNB-MOO8.
As far as I know it sould be AMI BIOS 3.03NP.
Or maybe you have jumper settings as well 😀
Thank you in advance.
Some items for sale 😀
https://docs.google.com/spreadsheets/d/1YNG8R … dit?usp=sharing
or maybe sobody have ami bios 3.03 ?
Some items for sale 😀
https://docs.google.com/spreadsheets/d/1YNG8R … dit?usp=sharing
I found this Bios for the GST chipset in my collection
you made my day 😀 thanks a lot I will test and let you know
Some items for sale 😀
https://docs.google.com/spreadsheets/d/1YNG8R … dit?usp=sharing
finally mobo got POST 😀 thanks again @BastlerMike
Some items for sale 😀
https://docs.google.com/spreadsheets/d/1YNG8R … dit?usp=sharing
Nice board and great result. I spot some unpopulated RAM silk screen outlines. Is it possible to add additional sockets to get to 1MiB without having to use the SIPP sockets? Could be nice for Himem, so you get a bit more conventional memory.
Just get simm adapters and plug them into the sipp sockets to get more ram. May need to remove the dimms or set jumpers to get it working. https://sbfmdrv.blogspot.com/2016/01/using-si … s-as-sipps.html
There's a glitch in the matrix.
A founding member of the 286 appreciation society.
Apparently 32-bit is dead and nobody likes P4s.
Of course, as always, I'm open to correction...😉
wrote:Nice board and great result. I spot some unpopulated RAM silk screen outlines. Is it possible to add additional sockets to get to 1MiB without having to use the SIPP sockets? Could be nice for Himem, so you get a bit more conventional memory.
I wil ltry to solder pins to SIMM 30 module and install it in the SIPP socket
Some items for sale 😀
https://docs.google.com/spreadsheets/d/1YNG8R … dit?usp=sharing
wrote:wrote:Nice board and great result. I spot some unpopulated RAM silk screen outlines. Is it possible to add additional sockets to get to 1MiB without having to use the SIPP sockets? Could be nice for Himem, so you get a bit more conventional memory.
I wil ltry to solder pins to SIMM 30 module and install it in the SIPP socket
Check out the link by Caluser above. It shows an alternative to that.
1982 to 2001
But you need simm socket, which I dont have 😒
Some items for sale 😀
https://docs.google.com/spreadsheets/d/1YNG8R … dit?usp=sharing
