hello everyone and sorry if I reopen an old discussion.
I have a similar problem, PC Olivetti M290, IDE CD ROM connected on an Opti 82c931 (IDE PORT, not panasonic / mitsumi etcetc) ..
sound card drivers correctly installed, Port adress 168 / IRQ 10 CD-ROM.
Philips CD player 8x PCA82CR / M2.
Whichever device driver I put, I always get the cdrom not found message.
i tried Vide-cdd.sys, OAKCDROM.sys and others.
the first line of the sys config loads the CDSETUP.SYS driver which is used only to set the port and IRQ of the cd. The strange thing is that it sets the port "/ P: 36e, 168" and IRQ "I: a" (a probably stands for 10)
can you help me?
Olivetti M290 / 386SX 16MHz / 4MB / 100MB HDD / TSENG ET3000 / Opti 82c931
Commodore 486DX33C / 486DX2 66MHz / 8MB / 500MB HDD / WD90c30 / Vibra16
Pentium MMX 233MHz / 64MB / 8.4GB HDD / Millennium II 4MB / 3Dfx Voodoo / Creative SoundBlaster AWE64 GOLD