VOGONS


Reply 360 of 363, by SteveC

User metadata
Rank Member
Rank
Member

Here's a few. AST Bravo MS Motherboard (HX chipset) with an Intel P133 (@133MHz), a Cyrix 6x86L P200+ (@133MHz - I can't do 75MHz bus on this board!) and a Cyrix 6x86 P150+ (@120MHz, and a million bent pins, and this got HOT!).

The board has 16Mb (2x8MB FPM SIMMS), no L2 cache (no COAST module) and an ATI Mach64 graphics chipset.

Cheers,
Steve

Attachments

  • cpus.png
    Filename
    cpus.png
    File size
    1.08 MiB
    Views
    49 views
    File license
    Fair use/fair dealing exception
  • 20210111_193515.jpg
    Filename
    20210111_193515.jpg
    File size
    299.9 KiB
    Views
    49 views
    File comment
    Eurgh!
    File license
    Fair use/fair dealing exception
  • Filename
    AST-PC P200+ at 133MHz.txt
    File size
    8.67 KiB
    Downloads
    6 downloads
    File license
    Fair use/fair dealing exception
  • Filename
    AST-PC P150+.txt
    File size
    8.67 KiB
    Downloads
    5 downloads
    File license
    Fair use/fair dealing exception
  • Filename
    AST-PC P133.txt
    File size
    8.74 KiB
    Downloads
    5 downloads
    File license
    Fair use/fair dealing exception

YouTube: https://www.youtube.com/channel/UCnG0NzvdJSb4_LibUPp0DwQ
Twitter: https://twitter.com/stevec00ps

Reply 361 of 363, by RayeR

User metadata
Rank Member
Rank
Member

Hehe, get a fine tweezer and a bit of patience, those pins bend easily but they are tought to break completly... Done on cuntless pins of refurbished CPUs...

Gigabyte GA-P67-DS3-B3, Core i7-2600K @4,5GHz, 4GB DDR3, 128GB SSD, GF7900GT, SB Audigy + YMF724F + DreamBlaster combo

Reply 362 of 363, by SteveC

User metadata
Rank Member
Rank
Member
RayeR wrote on 2021-01-12, 02:26:

Hehe, get a fine tweezer and a bit of patience, those pins bend easily but they are tought to break completly... Done on cuntless pins of refurbished CPUs...

Yeah took me about half an hour and a really aching hand afterwards but it worked!

YouTube: https://www.youtube.com/channel/UCnG0NzvdJSb4_LibUPp0DwQ
Twitter: https://twitter.com/stevec00ps