Epox EP-MVP3C2 PS2 Pinout \ VOGONS

Epox EP-MVP3C2 PS2 Pinout

Topic actions

Post a reply

First post, by AuxNuke

Posted on 2020-07-26, 17:52

AuxNuke Offline

Rank Newbie

Rank: Newbie
Posts: 3
Joined: 2020-07-26, 17:36

I'm using an Epox EP-MVP3C2 for a nice Super Socket 7 build. It appears that the PS2 header has a proprietary pinout:

Does anyone know the order for Data, VCC, CLK, and Ground?
Or anyone with this board and the included PS2 header able to map out which pin on the motherboard header goes to which pin on the PS2 port?

Last edited by AuxNuke on 2020-07-26, 18:02. Edited 1 time in total.

-Retro-
AMD K6-III+ 450ACZ @ 550MHz 2.1V
384MB (3 x 128MB) Infineon PC133 @ 100MHz CL2
Epox EP-MVP3C2
Diamond V770 32MB TNT2 AGP @ 150/170
Sound Blaster Live! CT4760
40GB WesternDigital Caviar 7200rpm
Netgear GA311 NIC

Reply 1 of 3, by darry

Posted on 2020-07-26, 18:02

darry Offline

Rank l33t++

Rank: l33t++
Posts: 5804
Joined: 2014-01-20, 06:27
Location: Canada

Closest I found is this . https://www.infania.net/misc/moboarchive/Epox … als/58mvp3c.pdf , for EP-58MVP3C-M

Hopefully, the pinout it the same .

Excerpt :

J1 :PS/2 MOUSE CONNECTOR:
1. DATA
2. CLK
3. GND
4. NC
5. VCC

Reply 2 of 3, by AuxNuke

Posted on 2020-07-26, 18:06

AuxNuke Offline

Rank Newbie

Rank: Newbie
Posts: 3
Joined: 2020-07-26, 17:36

Thanks darry, I'll give that a shot and report back.

Reply 3 of 3, by AuxNuke

Posted on 2020-07-26, 20:59

AuxNuke Offline

Rank Newbie

Rank: Newbie
Posts: 3
Joined: 2020-07-26, 17:36

Confirmed, this pinout also works for the EP-MVP3C2, thanks!

Go to top of page Go to top of page

Back to General Old Hardware

Main menu

Common searches