Hi. I'm trying to identify this motherboard. It's written 4SCP Ver: 1.0 on the silkscreen but can't find any reference of the board online. Need jumper settings. It has SIS 496/497 Chipset, socket 3. Thanks
What helped me a few times was to browse through the motherboard listings at Stason.org and see if any of the diagrams match your board.
In your case you could look for boards that have their cache chips in a row like that below the CPU. That stands out a bit.
Am486 DX4 120MHz, no L2, 16MB, Tseng ET4000/W32 1MB VLB, ESS ES1869 /// 5x86 133MHz, 256kb L2, 64MB, S3 Virge/DX 4MB PCI, SB16 + Yucatan FX, PicoGUS /// Pentium III 1GHz, 512MB, Asus V7700 64MB AGP, SB Live!
Looks awfully close to the Abit PI4T.
Thanks a lot for your answers. It looks similar to that one but jumpers are a bit different. I'm afraid I can damage something. I booted the motherboard and it displayed 486 dx2 66 so I guess it is now set to 5v cpu as now it's not booting anymore with a 3v 486 dx4 100 (hope I didn't burn the CPU...). I'll check if jumpers do match with that PI4 board.
