Hello fellow Oldies😉 I have a 486 with a motherboard that only says Ver.D2E on the PCB.
Biosinfo: 40-P300-001256-00101111-121593-OPTI895-U
I hope someone has the knowledge to get more info out of that then Lucky Star..
Happy covidfree year to all
Jens
Can you provide a photo?
See my graphics card database at www.gpuzoo.com
Constantly being worked on. Feel free to message me with any corrections or details of cards you would like me to research and add.
Does it look anything like this (Ver. D2C)
https://www.ebay.co.uk/itm/Dash-486-VLB-ISA-M … =p2047675.l2557
Pretty much like the Ebay One, exept for the coin cell battery om mine. How do I post photos? I tried without luck..
Below the Quick Reply text box, there is a button that says "Full Editor & Preview". If you click that, you get the option to upload photos.
See my graphics card database at www.gpuzoo.com
Constantly being worked on. Feel free to message me with any corrections or details of cards you would like me to research and add.
Here we go, I found the button. I hope enough is visible 🙂
/Jens
That works ! the ID string 001256 comes up with Lucky Star. Will do some searching later after chores are done 🙁
Hate posting a reply and then have to edit it because it made no sense 😁 First computer was an IBM 3270 workstation with CGA monitor. Stuff: https://archive.org/details/@horun
Thanks, that far I have come myself, no hurry and Happy new year!
I found at least a few potential matches:
Jetway J-403TG http://www.win3x.org/uh19/motherboard/show/5506
Edom MV035 http://www.win3x.org/uh19/motherboard/show/2043
BEK V429S http://www.win3x.org/uh19/motherboard/show/1043
It looks like one of those generic taiwanese boards which was cloned by many manufacturers, I'll look more into this.
Thanks, it seems to be the case. I looked at the link at the bottom and that showed that I have configured the CPU voltage correct for the Dx4 100 I picked up in a scrap pile 10 years ago😁
I bought an Ark 1000vl card om Ebay a while ago and get these results
