VOGONS


First post, by kotsoskorg

User metadata
Rank Newbie
Rank
Newbie

Good day and well met everybody,

I've got this motherboard https://www.elhvb.com/webhq/models/486vlb2/opti495slc.htm

Does anybody knows how to put to work this below front panel please?

Thank you.

Attachments

Reply 1 of 3, by chinny22

User metadata
Rank l33t
Rank
l33t

Do you mean set the numbers or also the buttons?
If you just want to set the numbers just connect it to the motherboard and mess around with the jumpers till it shows the correct numbers you want.
If your also after the power/reset buttons and the HDD/Turbo/Power led you should have a bunch of cables marked as such from the back of the unit that plugs into the motherboard, just like a modern case

Reply 2 of 3, by Cuttoon

User metadata
Rank Oldbie
Rank
Oldbie

There should be a bunch of cables attached to that panel. The motherboard manual says where they go.

The display thingie, look if any of those fits it:
http://minuszerodegrees.net/led_speed_display … eed_display.htm

I like jumpers.

Reply 3 of 3, by kotsoskorg

User metadata
Rank Newbie
Rank
Newbie

Hello again,
it is none of the above list. But, it was similar to other front panels and since I had an idea of those, I finished configured setting on 33Mhz on normal mode and 40Mhz on turbo mode.
A photo of the configuration.

Attachments