https://www.ebay.com/itm/271162005850?hash=it … ItemCondition=3

I have an Inwin A500 case. An Intel SBC2 E-ATX dual cpu serverboard. Without modification, the case (actually the drive cage) only allows for ~1/2" clearance above 1 of the cpus. Not enough for any hs/fan that I know of. I was thinking of making the most of the empty space with some kind of heatsink, and mounting 1 (or 2) of the featured fans off to the side. Whaddaya think? Specs also below:

(The fastest P3 run at 1.4ghz iinm. I have a pair of 1.33s. Not sure this board necessarily even loves those chips, it reports only 1 cpu is active (it's been a while since I turned it on). But it also reports bad ram, but I installed Win2K server w/o issue. Dom't even care about any of that. Just physically want the rig to be up to snuff for now).

Sunon Maglev Blower Fan - 12 V - 60 mm - B1208PTV1 - Apple iMac Cooling Fan

Blower fan manufactured by Sunon MagLev
Model number: B1208PTV1-A
Rated voltage: 12 V DC
Fan will also operate between 5 to 13.8 V
Current: 320 mA
Power: 3.8 Watts
4" long flexible power leads terminated with a 4 pin plug
Power connection: Both outer pins +12V and pin #2 GND
Dimensions: 130 mm Long x 110 mm Wide x 35 mm Thick
Impeller diameter : 60 mm
Weight : 3.6 oz ( 102 g )
Popular fan used in many Apple iMac computers