First post, by pentiumspeed
This supports MMX processor but POST reports 200MHz when set up correctly for 233MMX.
What's the latest bios firmware version?
Cheers,
Great Northern aka Canada.
This supports MMX processor but POST reports 200MHz when set up correctly for 233MMX.
What's the latest bios firmware version?
Cheers,
Great Northern aka Canada.
Sometimes the multipliers are scrambled on some cpus. But not usually the 3x/3.5x multi.
This is indeed a mmx p55c cpu?
Is set to 1.5x
Measure bf0 and bf1 to vcc3 (3.3v) how many ohms? (Power off, cpu removed)
What does cpuz say?
I looked at jan’s site. No listing there.
Re: Diy modding support for k6+And 120gb hard drives into bios roms
You could follow this thread for patching help.
Is fsb set to 66 mhz?
Sometimes bioses just false detect. My tyan s1564d always seems to think my 400 mhz k6-3+ is a 366. Jan says he can patch it. Waiting for him to get around to it 😀
It may be possible to use a bios from a different board. The people over at ultimate retro are good at suggesting ones to try.
pentiumspeed wrote on 2023-01-04, 22:35:This supports MMX processor but POST reports 200MHz when set up correctly for 233MMX.
What's the latest bios firmware version?
Cheers,
Latest BIOS is 4A3NT0X0.86A.0095.P10 (in ANP10.EXE here http://cwcyrix.duckdns.org/intel-legacy-files … 20AN430TX/BIOS/)
Thank you, I'll check all these once I have board out. I'm on work week at this moment till Saturday.
Cheers,
Great Northern aka Canada.