Limes Strange 3D prints \ VOGONS

Limes Strange 3D prints

Topic actions

First post, by CalamityLime

Posted on 2023-01-06, 07:59

CalamityLime Offline

Rank Member

Rank: Member
Posts: 430
Joined: 2021-07-23, 14:13
Location: Ireland

I 3d model and print things sometimes, something's could be useful for others for here's a collection that might be handy for people.

I'll start with the AT motherboard wallmount I made a little while ago.

Thingieverse link: https://www.thingiverse.com/thing:5768743
Printables link: https://www.printables.com/model/360437

I highly recommend to 3d model makers to import your models to Printables from Thingieverse. Thingieverse is nice and all but it has a tenancy to shadow ban random models for months at a time without telling you.

Be Happy, it's only going to get worse.
- Projects
Limes Strange 3D models
USB-2-232

Reply 1 of 2, by CalamityLime

Posted on 2023-01-06, 08:55

CalamityLime Offline

Rank Member

Rank: Member
Posts: 430
Joined: 2021-07-23, 14:13
Location: Ireland

Socket 7 CPU wallmount

Quickly made but came out okay.

Thingiverse Link: https://www.thingiverse.com/thing:5768804
Printables Link: https://www.printables.com/model/360475-socket-7-wallmount

-Lime

Be Happy, it's only going to get worse.
- Projects
Limes Strange 3D models
USB-2-232

Reply 2 of 2, by CalamityLime

Posted on 2023-01-06, 09:07

CalamityLime Offline

Rank Member

Rank: Member
Posts: 430
Joined: 2021-07-23, 14:13
Location: Ireland

This is a really basic model. Not going to bother uploading it to thingieverse.

I made this while repairing an old computer I got, the original PSU didn't have the correct power on button for the case so when I fitted an ATX psu in place of an AT psu, the on button of the case didn't have a button.
The correct type of button can be found in various things that switch mains voltage and I had a pile of broken electric showers in the garden. They had the correct switch but not for mounting the same way as the power buttons for AT cases.
I made this to hold 2 m3 nuts so the switch can be screwed in from the front instead of the back which is how it was mounted in the electric shower.

More than likely this is useless but it was handy for me.

Be Happy, it's only going to get worse.
- Projects
Limes Strange 3D models
USB-2-232

Go to top of page Go to top of page

Back to General Old Hardware