First post, by foxzflow
Hi guys,
I am posting just if you can help me out on make running coppermine CPU (using a slotket MS6905 Master V2) on a MS-6163 Pro (v2).
Currently, my MS-6163 Pro (v2) is running fine with a P3 500Mhz on slot 1. As I am running 3DFX Voodoo 3 2000 AGP as GPU card, my thoughts is that in some cases the current processor is actling as a bottleneck.
Because of so, I planned to upgrade the processor with a Coppermine one like P3 1Ghz (socket 370) or with a Celeron 1.1Ghz (socket 370) using a slotket.
First, I verified that my motherboard VRM is 8.4 compliant and it seems because the DC-DC is SC1153CSW. Then, I upgraded the BIOS to the latest one (W6163MJ V3.10 101100).
After that I went through installing the P3 1Ghz on the slotket using default jumpers but no video post. Tried manually setting the jumpers to the right settings for this processor but no post at all. I tried to do the same but using the Celeron 1,1Ghz but no post at all.
Any thoughts or suggestions? :\
Thanks so much!