First post, by Wolfus
- Rank
- Member
Hi guys,
I decided to upgrade my old trusty Gotek with a new OLED display and rotary knob. OLED was a piece of cake but I have some doubts with the knob...
I've bought this one:
https://www.aliexpress.com/item/33030321840.h … 1SK%21787520587
and tried this giude
https://github.com/keirf/FlashFloppy/wiki/Hardware-Mods
to connect it. What confused me is the connection of voltage pin. Keir writes it should be connected to 3,3V pin on Gotek board but my encoder has it labelled as 5V and even KY040 encoder he mentions has 5V on + pin in description... I am not sure if I should connect it to 3,3V or 5V and if it can hurt Gotek or even (heavens forbid) my Amiga.