First post, by chinny22
Rank
l33t++
- Rank
- l33t++
I remember someone else here had the same case and it was identified but cant find the post
Reply 1 of 5, by Horun
Rank
l33t++
- Rank
- l33t++
Looks similar to one of my In-Win mid towers, same front and yellow "quick" mounts. It may not be an In-Win but sure looks similar.
Hate posting a reply and then have to edit it because it made no sense 😁 First computer was an IBM 3270 workstation with CGA monitor. Stuff: https://archive.org/details/@horun
Reply 2 of 5, by pan069
Rank
Oldbie
- Rank
- Oldbie
It's this one, right?
Reply 3 of 5, by Tetrium
Rank
l33t++
- Rank
- l33t++
pan069 wrote on 2023-05-20, 03:12:It's this one, right?
Not this one, but it put me on the right track. OPs case looks like an In Win C583
Link: https://www.in-win.com/en/computer-chassis/c-series/APAC
Reply 4 of 5, by Tetrium
Rank
l33t++
- Rank
- l33t++
That plastic shroud on the side is even named on that page, as the Optional Vortex Air Duct. Info like that is easiest to get lost in time.
Reply 5 of 5, by chinny22
Rank
l33t++
- Rank
- l33t++
Brilliant thanks guys.
It was used in a industrial print works for something similar pantone colour matching system which was decommissioned before I started so the case was already a bit rough and very dusty.
I saved it as its a good looking case but sadly it was then stored in my lock up which gets damp during UK winters and that moist dust caused a bit of surface rust it seems.
With our move back to oz it's time to let it go. so going to try selling as a prebuilt XP machine with spare hardware I have (Asus P5KPL-AM, Ati Radeon HD3450, Some 2.5Ghz CPU)