I have this piece of HW. But I need working NDIS and/or packet driver. Drivers from internet don't work, except one ODI driver for Win95. Also FD100II drivers don't work (RTL8012 chip instead RTL8002)
One of Founding Fathers of the OldComp.cz
http://web.archive.org/web/20030422075211/htt … PORT/driver.htm
unfortunately fd100 is one driver that won't DL, prior to Dec 2002 all files were ftp which is dead...
Hate posting a reply and then have to edit it because it made no sense 😁 First computer was an IBM 3270 workstation with CGA monitor. Stuff: https://archive.org/details/@horun
This file can't be found on whole internet. I hope that someone have it in private archive or have this adapter with floppy disk. 😀
One of Founding Fathers of the OldComp.cz
Hi there everyone!
I've got a few of these adapters and have had uploaded their drivers a few years ago.
Not sure about their chipsets, though. 🙁
Re: 8086 laptop with Xircom parallel Port ethernet and use!umbs challenges
"Time, it seems, doesn't flow. For some it's fast, for some it's slow.
In what to one race is no time at all, another race can rise and fall..." - The Minstrel
//My video channel//
Thanks, but all 3 have different chipset.
One of Founding Fathers of the OldComp.cz
This archive shows that last versions of RTL 8002 drivers: http://web.archive.org/web/20000407130300/htt … 8002-driver.htm
ALL8002.EXE can be found and appears to have a RTL8002 NDIS2.0 Driver (v3.2) in the REDPNDIS.320 folder, (there are 2 diff .DOS files, would have to try both) if it does not work then not sure where else to look....
added: inside the 8002VERF.100 folder is a "TEST" folder with a POCTRB.COM and TRB.BAT files which appears to be a DOS level diagnostic for checking the para port adapter.....
Hate posting a reply and then have to edit it because it made no sense 😁 First computer was an IBM 3270 workstation with CGA monitor. Stuff: https://archive.org/details/@horun
I already tried that package, but only ODI driver from SVEC.95 directory works. (in Win95 and Win98). The other drivers shows on startup bad MAC adress. So it is problem of genereic RTL8002 drivers and SVEC has some way modified driver.
One of Founding Fathers of the OldComp.cz
