Jackhead wrote on 2023-11-14, 20:17:

I want to give my Asus P2B a little upgrade. So im looking to put in a 1Ghz P3. Well P3 1Ghz Slot 1 CPUs with FSB100 are prett […]
Show full quote

I want to give my Asus P2B a little upgrade. So im looking to put in a 1Ghz P3.
Well P3 1Ghz Slot 1 CPUs with FSB100 are pretty rare today so i was thinking about a 370/Slot1 adapter.
But im not sure what to buy here.
First question can i run with a adapter a 133FSB CPU at 100FSB? Are there difference on the Adapters? What i need to look for.

Maybe this helps as info guide:
https://drive.google.com/file/d/1kGgO3TJyFDTH … y4wVj4GJBY/view

Shponglefan wrote on 2023-11-15, 17:23:

Jasin Natael wrote on 2023-11-15, 16:15:

This is true, but it's fairly uncommon to find a socket 370 board with ISA slots.
I think this and the stellar reputation of the 440BX chipset is what draws so many people to the slocket to begin with.

I just did an Ebay search and the third one in the list of results is Socket 370, Intel 440BX chipset and has a pair of ISA slots for$35 USD (+ shipping).

¯\_(ツ)_/¯

You aren't wrong!
I did the same search and found it as well. However the shipping was $25.....nearly the same cost as the board itself.
That's not your fault, and probably not the sellers either. That said the average asking prices for them are normally $80-$100 or so.
I'm just cheap. I refuse to pay current market prices for retro tech, unless it is particularly special or rare. That's my hangup though.

I own about 14 Slotkets. Lots of jumpers is not always a sign of Coppermine compatibility. There are also Slotkets with very few jumpers that support Coppermine and I also have a few Slotkets with many jumpers supporting only Mendocino. About 4 have voltage control.

PARKE wrote on 2023-11-15, 17:26:

Jackhead wrote on 2023-11-14, 20:17:

I want to give my Asus P2B a little upgrade. So im looking to put in a 1Ghz P3. Well P3 1Ghz Slot 1 CPUs with FSB100 are prett […]
Show full quote

I want to give my Asus P2B a little upgrade. So im looking to put in a 1Ghz P3.
Well P3 1Ghz Slot 1 CPUs with FSB100 are pretty rare today so i was thinking about a 370/Slot1 adapter.
But im not sure what to buy here.
First question can i run with a adapter a 133FSB CPU at 100FSB? Are there difference on the Adapters? What i need to look for.

Maybe this helps as info guide:
https://drive.google.com/file/d/1kGgO3TJyFDTH … y4wVj4GJBY/view

That info guide is why I linked to page 3 of that previous vogons thread where you had posted it. Plus there was other good info in that thread as well.

AlexZ wrote on 2023-11-15, 22:21:

I own about 14 Slotkets. Lots of jumpers is not always a sign of Coppermine compatibility. There are also Slotkets with very few jumpers that support Coppermine and I also have a few Slotkets with many jumpers supporting only Mendocino. About 4 have voltage control.

Found the guy hoarding all the slotkets 😁

smtkr wrote on 2023-11-16, 00:28:

AlexZ wrote on 2023-11-15, 22:21:

I own about 14 Slotkets. Lots of jumpers is not always a sign of Coppermine compatibility. There are also Slotkets with very few jumpers that support Coppermine and I also have a few Slotkets with many jumpers supporting only Mendocino. About 4 have voltage control.

Found the guy hoarding all the slotkets 😁

I just went and checked my computer room and counted 20 slotkets, I picked them up about 5+ years ago and dont think I paid more than $5-$8 for most of them including shipping although I think the ASUS s370-DLs were more about $15 each.

I can agree with what AlexZ posted.

I don't feel so bad now for having about six... or so... I should do a round up, believe I have 2 MS6905s, one shuttle, one asus, one startech one upgradeware slot T... and prolly 5 slots for them to belong in. ... unless I'm gonna go nuts cramming 1.4 Ghz of tualatin in a SFF compaq deskpro for giggles. ... hmmm yeah, the perfect fast enough to be too slow to play crysis rig...

Grem Five wrote on 2023-11-15, 23:00:

PARKE wrote on 2023-11-15, 17:26:

Maybe this helps as info guide:
https://drive.google.com/file/d/1kGgO3TJyFDTH … y4wVj4GJBY/view

That info guide is why I linked to page 3 of that previous vogons thread where you had posted it. Plus there was other good info in that thread as well.

Oh, I overlooked that, sorry.